Somerset · England
Bath chip & crack repair in Combe, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Combe, with a one-year guarantee on every repair.
- Repairs from £95
- Rust by the waste and overflow
- Chips caused by builders
Bath repair in Combe without replacing anything
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We regularly repair acrylic, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are an old repair that has yellowed or come loose and rust by the waste and overflow.
Whatever the size of the job, you get the same one-year guarantee in Combe and across Somerset.
- Location
- Combe (TA10)
- Area hub
- Somerset
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Combe
Combe is about 9 miles south-east of Bridgwater, in Somerset. We visit homes and businesses in Combe, so you don’t need to take anything anywhere. Combe is one of 640 places in Somerset we cover.
All of TA10 is covered, from the main roads to the quietest streets. Other places close to Combe include Wearne (1 mile east), Langport (1 mile south-east), Pict's Hill (1 mile east), Aller (1 mile north-west) and Wagg (1 mile south-east). Further out, we also cover Taunton (12 miles west), Bridgwater (9 miles north-west), Yeovil (11 miles south-east), Chard (13 miles south-west), Burnham-on-Sea (15 miles north-west) and Wells (14 miles north-east).
Near you in Combe
Locally, our jobs take us to homes close to Church of All Saints, The Black Swan Inn and Huish Episcopi Academy, among other places. The countryside around Combe includes West Sedgemoor RSPB reserve and Burrow Mump.
Places near Combe
Other services in Combe
Questions from Combe
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens once I’ve sent photos?
You’ll get a fixed quote back. There’s no obligation to book.
Will I be able to see the repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders across Somerset.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
How long does the repair take to cure?
Usually the next day. We confirm the time before we leave.
Can a cracked acrylic bath be fixed?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why Combe customers choose us
- Fixed prices from your pictures
- One visit for most repairs
- Everything repaired in place
- No extra charge for your area
Read our full price list or resurfacing vs replacement cost guide.
Aftercare tips
So the finish stays in good condition:
- Store metal items away from the bath
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we do, step by step
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. Allow two to three hours for most chips, and we will tell you if anything changes.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
- Have a window or extractor fan available
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
What affects the price in Combe
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- Access to the area
- The size and number of damaged areas
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
Phone photos are fine. Just make sure we can see:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Natural light rather than flash
- Whether it’s been repaired or coated before
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Landlord and trade work in Combe
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Combe as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Flexing caused by a failed cradle or loose feet
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly before booking.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
