Somerset · England
Bath Repair for Othery homes
Bath repair in Othery without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Chips on the rim or sides
- Cracks in an acrylic bath
Othery and the surrounding area
Othery is about 6 miles south-east of Bridgwater, in Somerset. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Othery is one of 640 towns and villages in Somerset we cover.
Here we cover the TA7 postcode area. From High Street, Keens Lane and Mill Lane or a nearby road, a technician can come to you. We also cover the places around Othery: Middlezoy (1 mile north-west), Beer (1 mile east), Aller (2 miles south-east), High Ham (3 miles east) and Combe (3 miles south-east). Larger places within reach include Taunton (10 miles south-west), Bridgwater (6 miles north-west), Yeovil (14 miles south-east), Chard (15 miles south), Burnham-on-Sea (12 miles north-west) and Wells (13 miles north-east).
Around Othery
In Othery, that means homes near Othery Village School, London Inn and Church of St Michael and the streets around them. Other landmarks nearby include Willows and Wetlands Visitor Centre (3.4 miles south-west) and Bridgwater Community Hospital (5.8 miles north-west). For a walk, there’s Burrow Mump and West Sedgemoor RSPB reserve.
How we handle bath repair in Othery
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. Typical jobs include chips along the edge of the bath and a cracked acrylic bath, across pressed steel enamel, acrylic and whirlpool & spa baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Othery (TA7)
- Area hub
- Somerset
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
- Have new chips seen to early
- Keep metal cans and razors off the surface
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which generally takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
Getting ready for the visit
- Have a window or extractor fan available
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
Othery questions
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do you cover Othery?
We do. We send a technician to Othery for every job, and the price is the same as everywhere else.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Landlord and trade work in Othery
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Also in Othery
What bath repair costs
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Access to the area
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- The size and number of damaged areas
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- A close-up of the damage, in focus
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
What we’re called out for in Othery
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
The most common problems we are called about are:
- Rust by the waste and overflow
- Damage beneath the taps
- Scuffs and scratches in the surface
- Chips on the rim or sides
Questions to ask before you book
- What protection goes down before work starts
- Whether a trained technician does the job
- Whether the price covers travel
- How long it needs to cure
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- Colour-matched on site
- A fixed quote before booking
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
Read our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
