Leicestershire · England
Bath Repair in Belcher's Bar
We travel to Belcher's Bar for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last
Belcher's Bar and the surrounding area
Belcher's Bar is about 4 miles south-west of Coalville, in Leicestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Belcher's Bar is one of 287 towns and villages in Leicestershire where we work. Our jobs stretch from Belcher's Bar to Birmingham (25 miles away).
Our visits in LE67 work the same way as everywhere else we cover. If you’re just outside Belcher's Bar, we cover Nailstone (1 mile south-east), Battram (1 mile north-east), Osbaston Hollow (2 miles south), Barlestone (2 miles south-east) and Bagworth (2 miles east). Further out, we also cover Loughborough (10 miles north-east), Hinckley (9 miles south), Wigston (14 miles south-east), Coalville (4 miles north-east), Ashby-de-la-Zouch (6 miles north-west) and Shepshed (8 miles north-east).
Near you in Belcher's Bar
Around Belcher's Bar, we work in homes near Church of St Denys and Paget Tombs in Churchyard, Sence Valley Forest Park and Dove Bank Primary School, among other places. A little further out are Shackerstone railway station (2.2 miles south-west). Green spaces nearby include Bardon Hill.
About our bath repair in Belcher's Bar
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. Whether it’s deep scratches in acrylic and chips caused by builders, we can typically put it right, on acrylic, roll-top & freestanding and cast iron enamel alike.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Belcher's Bar (LE67)
- Region
- Leicestershire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Belcher's Bar
Also in Belcher's Bar
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Check that an acrylic bath doesn’t move when you stand in it
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
- Rinse it down after each bath
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we will tell you honestly.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Questions from Belcher's Bar
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
How do I get a price for bath repair in Belcher's Bar?
Repairs from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your LE67 postcode.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What areas do you cover?
Across the UK, so Belcher's Bar is covered. Prices don’t change with location.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Landlord and trade work in Belcher's Bar
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Should you replace it?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- Every repair guaranteed for a year
- Same prices wherever you are
- Colours mixed by hand to suit your surface
- One visit for most repairs
Take a look at our pricing or guide to resurfacing and replacement costs.
Common problems we fix in Belcher's Bar
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
If you can see any of these, send us a photo:
- Holes from dropped items
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
Before booking anyone
- What happens if the damage is worse than the photos show
- Whether a trained technician does the job
- What prep work is covered
- Whether the price covers travel
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Let us know if it has been repaired before
How to get a price
To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
About our accreditations · Every repair comes with a one-year guarantee.
