Leicestershire · England

Bath Repair in Nailstone

Chip and crack repairs to enamel, acrylic and cast iron baths in Nailstone, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Snagging damage from a refit
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Nailstone

How the visit works

Your technician turns up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take two to three hours for most chips, and the room is left clean and tidy.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can generally use the bath the following day.

How to prepare

  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park
  • Make sure the area is dry

Get a quote

The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Advice

Bath repair in Nailstone without replacing anything

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Our repair technicians work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and the jobs we see most are scuffs and scratches in the surface and a failed DIY repair that’s discoloured or lifting.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Area
Nailstone (CV13)
County
Leicestershire
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

When we would advise against a repair

We will not take on work that won’t last, so here’s what a repair can’t put right:

  • Cracks in acrylic we can’t reach from underneath
  • Wear across the entire surface, which needs re-enamelling
  • Rust that has eaten right through a steel bath

Not sure? Send pictures and we’ll give you a straight answer before you book.

What we work on

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

Nailstone and the surrounding area

Nailstone is about 4 miles south of Coalville, in Leicestershire. Jobs in Nailstone are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Nailstone is one of 287 towns and villages in Leicestershire where we work. Our jobs stretch from Nailstone to Birmingham (about 25 miles away).

Postcode districts we cover here: CV13. Local streets include Main Street, Church Road and The Oval, and we cover them all. We also travel to Osbaston Hollow (1 mile south), Belcher's Bar (1 mile north-west), Barlestone (1 mile south-east), Battram (2 miles north-east) and Osbaston (2 miles south-east). We also work in nearby towns such as Loughborough (10 miles north-east), Hinckley (8 miles south), Wigston (13 miles south-east), Coalville (4 miles north), Ashby-de-la-Zouch (7 miles north-west) and Shepshed (8 miles north-east).

Near you in Nailstone

Around Nailstone, we work in homes near Church of All Saints, Ibstock Community College and Dove Bank Primary School. Other landmarks nearby include Shackerstone railway station (2.4 miles west). The countryside around Nailstone includes Bardon Hill.

Map of Nailstone © OpenStreetMap contributors

Can I fix it myself?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Materials and what they mean for the repair

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Why repair rather than replace?

Swapping a damaged bath for a new one generally means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why book with us

  • Same prices wherever you are
  • Rooms protected and left tidy
  • We come to you, anywhere in the UK
  • Accredited with CHAS, Constructionline and SafeContractor

See our full price list or resurfacing vs replacement cost guide.

When to call us in Nailstone

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

If you can see any of these, send us a photo:

  • Deep scratches in acrylic
  • A chip where the taps sit
  • A failed DIY repair that is discoloured or lifting
  • Rusty patches near the plughole

Before you book anyone

  • How your room will be protected
  • Whether the price covers travel
  • When it can be used again
  • Whether they match the colour on site

Choosing a repair company

Looking after it afterwards

Aftercare is simple:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Get a dripping tap fixed promptly
  • Rinse the bath after use, especially in hard water areas
  • Check that an acrylic bath does not move when you stand in it

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Nailstone questions

Can you price it without visiting?

Typically, yes. Clear pictures let us give you a fixed price without visiting.

Can you repair something that is been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Which areas do you work in?

All of Leicestershire, and the rest of the UK. Travel is included in the price.

What about rust by the waste?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

How much does bath repair cost in Nailstone?

Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.

What bath repair costs

Prices start from £95. There is no area surcharge for Nailstone. What changes the price is:

  • How easy the damage is to reach
  • How much damage there is
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match

A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

How to get a fixed quote

When you take your photos, a few simple things make all the difference:

  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area
  • Natural light rather than flash
  • One picture of the whole bath

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.