Greater London · England

Bath chip & crack repair in Belsize Park, Greater London

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Belsize Park. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Damage beneath the taps
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Belsize Park?

About our bath repair in Belsize Park

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. If you’re dealing with damage done while the bathroom was being fitted and a chip where the taps sit, we can help, whatever the material.

You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Area
Belsize Park (NW3, NW5, NW1)
Area hub
Greater London
Cover
One year on every repair
Quotes
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Belsize Park: your questions answered

Will the repair last?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before and we will plan for it.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

How long does the repair take to cure?

Usually within a day, though it depends on what we’ve done.

Do you work in Belsize Park?

We do. We send a technician to Belsize Park for every job, and the price is the same as everywhere else.

Is my repair covered?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

What does bath repair cost?

Prices start from £95. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the whole item and your postcode.

About Belsize Park

Belsize Park is about 1 mile south-east of Hampstead, in Greater London. From the centre of Belsize Park to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover all 764 towns and villages in Greater London, from the larger towns to small villages.

Every address in NW3, NW5 and NW1 is covered, from the main roads to the quietest streets. Local streets include Eton Road, Lawn Road and Ornan Road. Other places close to Belsize Park include Haverstock (1 mile north), Primrose Hill (1 mile south), South Hampstead (1 mile west), Swiss Cottage (1 mile west) and Chalk Farm (1 mile east). We also work in nearby towns such as London (4 miles south-east), Kensington (4 miles south-west), Shoreditch (4 miles east), Walthamstow (7 miles north-east), Hoxton (3 miles east) and Whitechapel (4 miles south-east).

What’s near Belsize Park

Typical jobs here are in homes near St. Mary's Town and Country School, Church of St Mary the Virgin and Primrose Hill and the streets around them. Also close by are Cecil Sharp House (0.8 miles south-east), The Washington pub (less than half a mile north), Fine Arts College (within half a mile north-west) and St Paul's Church of England Primary School (within half a mile south). The nearest railway station is South Hampstead station, about 0.7 miles west of the centre. Well-known places in the area include O2 Centre (0.8 miles west) and Metropolitan Borough of Hampstead (less than half a mile north). Green spaces nearby include Adelaide Nature Reserve and The Long Water.

Map of Belsize Park © OpenStreetMap contributors

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

The process

Your technician turns up at the time we agreed with you and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Let the surface dry out before the visit
  • Mention if the room is upstairs or in a flat

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Send pictures for a quote

Related advice

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Get a dripping tap fixed promptly
  • Do not leave razors or cans standing in the bath
  • Check that an acrylic bath doesn’t move when you stand in it

There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

Honest limits

Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:

  • Wear across the whole surface, which needs re-enamelling
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Metal that has corroded all the way through

If in doubt, send pictures and we’ll say what we think before booking.

Surfaces we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths

Common problems we fix in Belsize Park

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.

If you can see any of these, send us a picture:

  • Rusty patches near the plughole
  • Damage done while the bathroom was being fitted
  • Scratches you can feel with a fingernail
  • A cracked acrylic bath

What to look for in a quote

  • What the guarantee covers, and for how long
  • How your room will be protected
  • What preparation is included
  • Whether a trained technician does the job

How to compare quotes

For landlords and businesses

If you manage property in Belsize Park, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

How we price bath repair

Repairs from £95. A fixed quote means you know the cost before booking. We take into account:

  • Access to the area
  • Any earlier repairs that need removing first
  • How many items we do on one visit
  • How hard the colour is to match

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Send photos for a quote

Photographing the damage takes a minute. Try to send:

  • A coin or ruler next to the damage for scale
  • Natural light rather than flash
  • A clear, close picture of the problem area
  • Any details about the material

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Repair or replace: which is better?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why choose Surface Doctor in Belsize Park

  • Technicians who travel to you, UK-wide
  • One price list for the whole UK
  • A fixed quote before you book
  • CHAS, Constructionline and SafeContractor accredited

Read our full price list and guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.