Greater London · England

Bath Repair in Haverstock

Damaged bath in Haverstock? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Chips along the edge of the bath
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Haverstock

Landlords, agents and businesses in Haverstock

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

How we handle bath repair in Haverstock

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. Our repair technicians work on pressed steel enamel, acrylic and roll-top & freestanding, and common reasons people get in touch are a failed DIY repair that’s discoloured or lifting and rust by the waste and overflow.

Every job is backed for twelve months in Haverstock and everywhere else. If something goes wrong with the work, we come back.

Rusty chip next to a bath plughole, before and after repair
Area
Haverstock (NW3, NW5, NW1)
County
Greater London
Cover
One year on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

Where we work around Haverstock

Haverstock is about 1 mile south-east of Hampstead, in Greater London. Whether you’re in the middle of Haverstock or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 764 places across Greater London.

We cover every part of the NW3, NW5 and NW1 postcode area and the streets around it. Whether you live on Eton Road, Lawn Road and Ornan Road or anywhere nearby, we can come to you. We also cover the places around Haverstock: Belsize Park (1 mile north), Primrose Hill (1 mile south), South Hampstead (1 mile west), Swiss Cottage (1 mile west) and Chalk Farm (1 mile east). Within a short drive, we also cover London (4 miles south-east), Kensington (4 miles south-west), Shoreditch (4 miles east), Walthamstow (7 miles north-east), Hoxton (3 miles east) and Whitechapel (4 miles south-east).

Around Haverstock

Around Haverstock, we work in homes near The Washington pub, Church of St Mary the Virgin and Fine Arts College, among other places. Other local landmarks include St Paul's Church of England Primary School (under half a mile south), St. Mary's Town and Country School (within half a mile west), Primrose Hill (within half a mile south) and Cecil Sharp House (0.8 miles south-east). For rail, the closest station is South Hampstead station, about 0.7 miles west. Well-known places in the area include Montfichet's Tower (3.4 miles south-east) and O2 Centre (0.8 miles west). For a walk, there’s Adelaide Nature Reserve and Primrose Hill.

  • Other local spots include Metropolitan Borough of Hampstead (less than half a mile north)
Map of Haverstock © OpenStreetMap contributors

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

How the visit works

You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a few hours, depending on the damage, and you are welcome to carry on with your day while we work.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the day after.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Mention any earlier repairs or resurfacing
  • Mention if the room is upstairs or in a flat

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a free quote

Advice

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.

When to call us in Haverstock

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.

Most people get in touch when they notice something like this:

  • Deep scratches in acrylic
  • Damage beneath the taps
  • Chips on the rim or sides
  • Chips caused by builders

Questions to ask before booking

  • A fixed quote, and whether VAT is included
  • What happens if they find more damage
  • If travel is included in the price
  • Whether they match the colour on site

Our hiring checklist

Haverstock: your questions answered

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Greater London.

Will there be a smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

How soon can you come?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

Will the repair show?

On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Keeping it looking good

To keep it looking its best for years:

  • Put a towel in the bath if you’re working above it
  • Avoid scourers, wire wool and gritty cream cleaners
  • Stick to mild cleaners and a soft cloth
  • Check that an acrylic bath does not move when you stand in it

Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

Honest limits

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • A bath that moves underfoot, until its support is fixed
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Send us pictures and we’ll tell you honestly before booking.

Materials we work on in Haverstock

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic

What bath repair costs

Repairs from £95. We don’t charge extra for travel to Haverstock. The price depends on:

  • Whether old repairs or coatings need taking off
  • How hard the colour is to match
  • The material and finish
  • The size and number of damaged areas

Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

How to get a fixed price

You can take the pictures on your phone, there’s no need for anything special. Make sure they show:

  • What it’s made of, if you know
  • A picture taken from further back
  • Whether it’s been repaired or coated before
  • Natural light rather than flash

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.