Northumberland · England

Bath chip & crack repair in Birgham, Northumberland

Fixed-price bath repair in Birgham and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Birgham

Common questions in Birgham

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can I get a quote without a visit?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Can you redo someone else’s repair?

Normally, yes. We remove the old repair before doing a new one.

Is a bath repair durable?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

Can you repair a hole in a bath?

Frequently, if there is access underneath. The hole is backed, filled and refinished to match.

Can you repair a chip on a coloured bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Bath repair in Birgham without replacing anything

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. Common call-outs are for scratches you can feel with a fingernail and damage done while the bathroom was being fitted, in roll-top & freestanding, pressed steel enamel and acrylic.

Every repair is covered by our one-year guarantee.

Rusty chip next to a bath plughole, before and after repair
Location
Birgham (TD12)
Area hub
Northumberland
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

Covering Birgham

Birgham is about 15 miles south-west of Berwick-upon-Tweed, in Northumberland. Anywhere in TD12, we come to you. We work in 189 places across Northumberland. Our nearest city page is Edinburgh, about 40 miles away.

Our visits in TD12 work the same way as everywhere else we cover. From East Haugh and Treaty Park or anywhere nearby, a technician can come to you. Other places close to Birgham include Wark (2 miles east), Scottish Borders (2 miles north-east), Eccles (2 miles north-west), Coldstream (3 miles east) and Leitholm (3 miles north). Within a short drive, we also cover Berwick-upon-Tweed (15 miles north-east), Wooler (14 miles south-east), East Ord (14 miles north-east) and Spittal (15 miles north-east).

What’s near Birgham

Typical jobs here are in homes near Church of St Cuthbert, among other places. Well-known places in the area include Bite-about Pele (4.7 miles north) and Hirsel Homestead Museum & Craft Centre (2.4 miles north-east). For a walk, there’s Hoselaw Loch and Din Moss and Lake of the Hirsel.

Map of Birgham © OpenStreetMap contributors

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Work for landlords and builders

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

What your bath is made of matters

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.

What we cannot put right

Some problems need a builder, plumber or fitter rather than us:

  • A steel bath rusted through
  • Leaking fittings, which need a plumber
  • Acrylic cracks with no access behind them

Send us pictures and we’ll tell you honestly.

Materials we work on in Birgham

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding

How it works

Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a morning or an afternoon, and we’ll keep you posted as we go.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Ensure the area is dry
  • Mention any parking restrictions or tricky access
  • Move bottles, mats and clutter away from the area

Get a quote

If you’re in Birgham and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send photos for a quote

Related advice

Aftercare tips

To keep it looking its best for years:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Cover the bath during DIY or decorating
  • Avoid scourers, wire wool and gritty cream cleaners
  • A dripping tap stains enamel, so fix it early

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Common problems we fix in Birgham

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.

Look out for any of the following:

  • Rust spots around the plughole
  • A failed DIY repair that’s discoloured or lifting
  • Holes from dropped items
  • Damage beneath the taps

Before you book anyone

  • What happens if the damage is worse than the pictures show
  • Whether the price covers travel
  • Whether cleaning and preparation are in the price
  • What aftercare is recommended

10 questions to ask before you book

What bath repair costs

Repairs from £95. Quotes are free and the price is fixed. What we look at:

  • Doing more than one item at once
  • What kind of damage it is
  • The material
  • How easy the damage is to reach

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed price

Good pictures mean an accurate price. Here’s what helps:

  • Natural light rather than flash
  • Your postcode, so we can check dates
  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.