North Yorkshire · England
Bath chip & crack repair in Birkby, North Yorkshire
Damaged bath in Birkby? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- A hole punched through by something heavy
Birkby and nearby
Birkby is about 6 miles north-west of Northallerton, in North Yorkshire. Our technicians come to clients in Birkby and the surrounding area, so nothing has to leave your home. Birkby is one of 626 towns and villages in North Yorkshire where we work. You can also see our page for Newcastle upon Tyne, about 40 miles away.
Postcode districts we cover here: DL7. Close by, we cover Great Smeaton (2 miles north-east), High Entercommon (2 miles north), Low Entercommon (2 miles north), Deighton (3 miles east) and Neasham (5 miles north). We also work in nearby towns such as Catterick Garrison (9 miles west), Northallerton (6 miles south-east), Richmond (10 miles west), Thirsk (14 miles south-east), Colburn (8 miles west) and Stokesley (13 miles east).
Near you in Birkby
Locally, our jobs take us to homes close to Church of St Peter and the streets around them. A little further out are South Cowton Castle (2.4 miles west) and Friarage Hospital (5.4 miles south-east).
How we handle bath repair in Birkby
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Our technicians work on roll-top & freestanding, pressed steel enamel and acrylic, and common reasons people contact us are chips on the rim or sides and a failed DIY repair that’s discoloured or lifting.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Birkby (DL7)
- County
- North Yorkshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Birkby
Other services in Birkby
Common questions in Birkby
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we’ll plan for it.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a morning or an afternoon, including clearing up.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
- Keep children and pets away from the room on the day
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
What a repair can’t fix
We will always be straight with you, so here’s what a repair will not do:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Keep metal cans and razors off the surface
- Have new chips seen to early
- Avoid scourers, wire wool and gritty cream cleaners
- If an acrylic bath flexes, have its feet adjusted
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Landlord and trade work in Birkby
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What affects the price in Birkby
Prices start from £95. You will not pay by the hour. The price depends on:
- The material and finish
- Previous DIY repairs that have to come out
- How many items we do on one visit
- Unusual colours or finishes
The price reflects the work involved, not your postcode. The full price is agreed before booking.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Any details about the material
- Something in shot to show the size
- Whether it’s been repaired or coated before
- A photo taken from further back
If you are in Birkby and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
When to call us in Birkby
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
The things customers typically mention when they call are:
- Chips caused by builders
- Holes from dropped items
- Chips on the rim or sides
- Rusty patches near the plughole
What to look for in a quote
- Aftercare advice
- What happens if the damage is worse than the pictures show
- Whether the price covers travel
- What protection goes down before work starts
About our accreditations · Every repair comes with a one-year guarantee.
