Stockton-on-Tees · England
Bath chip & crack repair in High Worsall, Stockton-on-Tees
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in High Worsall and across Stockton-on-Tees. Free, fixed quotes from your pictures.
- Repairs from £95
- Impact holes in acrylic
- Scratches you can feel with a fingernail
Bath repair in High Worsall, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our repair technicians work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and people most often call us about rust by the waste and overflow and hairline or through cracks in acrylic.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- High Worsall (TS15)
- Region
- Stockton-on-Tees
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in High Worsall
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, photos and access details.
What a repair can’t fix
Some jobs aren’t right for a repair, for example:
- A bath that moves underfoot, until its support is fixed
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly.
Materials we work on in High Worsall
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take two to three hours for most chips.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Let us know if it has been repaired before
- Point us to the nearest place to park
- Let us know which floor the room is on
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
When to call us in High Worsall
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.
People typically call us after spotting one of these:
- Snagging damage from a refit
- A chip where the taps sit
- Impact holes in acrylic
- An old repair that has yellowed or come loose
Comparing quotes
- What the guarantee covers, and for how long
- How the room is protected while they work
- Aftercare advice
- What happens if the damage is worse than the pictures show
Repairing versus replacing in High Worsall
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. Our prices are the same across the UK, so there is no premium for High Worsall. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- One price list for the whole UK
- Nothing taken out or refitted
Read our full price list or bath cost comparison.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Rinse it down after each bath
- Check that an acrylic bath doesn’t move when you stand in it
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Our work in High Worsall
High Worsall is about 2 miles south-west of Yarm, in Stockton-on-Tees. Wherever you are in the TS15 postcode area, a technician comes to you. We work in all 31 towns and villages across Stockton-on-Tees, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 37 miles away.
Our technicians cover all of TS15 and the streets around it. Local streets include Church Lane, Village Road and Tofts Close, and we cover them all. We also cover the places around High Worsall: Neasham (4 miles west), Great Smeaton (4 miles south-west), High Entercommon (4 miles south-west), Low Entercommon (4 miles south-west) and Deighton (5 miles south). Further out, we also cover Stockton-on-Tees (7 miles north-east), Billingham (10 miles north-east), Ingleby Barwick (5 miles north-east), Thornaby-on-Tees (6 miles north-east), Egglescliffe (4 miles north-east) and Elm Tree Farm (7 miles north).
Around High Worsall
Our customers here include homes close to Conyers School, Church of All Saints and The Ship pub. The closest station to High Worsall is Yarm station, about 2.3 miles north-east. A little further out are Yarm Castle (2.8 miles north-east).
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Towns and villages near High Worsall
Other services in High Worsall
High Worsall: your questions answered
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Can you repair a crack in an acrylic bath?
Typically, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you cover High Worsall?
Yes. We cover the whole UK and come to High Worsall. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
What areas do you cover?
All of Stockton-on-Tees, and the rest of the UK. There’s no extra charge for travel.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
About our accreditations · Every repair comes with a one-year guarantee.
