North Yorkshire · England
Bath chip & crack repair in Low Entercommon, North Yorkshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Low Entercommon and across North Yorkshire. Free, fixed quotes from your photos.
- Repairs from £95
- An old repair that has yellowed or come loose
- Holes from dropped items
Do you need bath repair in Low Entercommon?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Customers normally contact us about:
- Chips under the taps
- Chips along the edge of the bath
- A kit repair that didn’t last
- A hole punched through by something heavy
Before you book anyone
- What protection goes down before work starts
- What happens if they find more damage
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
Bath repair in Low Entercommon without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. Typical jobs include chips under the taps and a cracked acrylic bath, in cast iron enamel, pressed steel enamel and whirlpool & spa baths.
Big or small, you get the same one-year guarantee.
- Area
- Low Entercommon (DL6)
- Region
- North Yorkshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Many people think a damaged bath means a new one. Usually it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why Low Entercommon clients choose us
- Rooms protected and left tidy
- Normally one visit, start to finish
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our prices page and bath cost comparison.
When a repair isn’t the answer
We will not take on work that will not last, so here’s what a repair can’t put right:
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
How we price bath repair
Prices start from £95. You won’t pay by the hour. The price is based on:
- Whether we combine several jobs
- How much damage there is
- How easy the damage is to reach
- The type of damage
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
How to get a fixed quote
You can take the pictures on your phone. Just ensure we can see:
- Natural light rather than flash
- Whether it’s been repaired or coated before
- The material, if you know it
- A wider photo showing the entire bath
Upload pictures of the damage and one of the whole item, with your DL6 postcode, and we’ll come back with a fixed quote.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Covering Low Entercommon
Low Entercommon is about 6 miles south-west of Yarm, in North Yorkshire. Our repair technicians come to customers in Low Entercommon and the surrounding area, so nothing has to leave your home. We work in 626 places across North Yorkshire. We work right across the region, from Low Entercommon to Newcastle upon Tyne (38 miles away).
Here we cover the DL6 postcode area. We also cover the places around Low Entercommon: High Entercommon (1 mile south-east), Great Smeaton (1 mile south-east), Birkby (2 miles south), Neasham (3 miles north) and High Worsall (4 miles north-east). Further out, we also cover Catterick Garrison (10 miles south-west), Northallerton (8 miles south), Richmond (10 miles west), Colburn (10 miles south-west), Stokesley (12 miles east) and Bedale (12 miles south).
Local landmarks in Low Entercommon
In Low Entercommon, that means homes near All Saints Church, among other places. For rail, the closest station is Dinsdale station, roughly 4.6 miles north. Further afield, we also cover the area around South Cowton Castle (3.4 miles south-west).
How the visit works
We turn up at the time we agreed with you and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Clear the area around the damage
Get a quote
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Questions from Low Entercommon
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Can you quote from pictures?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Places near Low Entercommon
Also in Low Entercommon
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
About our accreditations · Every repair comes with a one-year guarantee.
