Hampshire · England

Bath Repair for Bishop's Waltham homes

Bath repair for Bishop's Waltham, without a refit. Send us pictures for a fixed price, then book a visit.

  • Repairs from £95
  • A failed DIY repair that’s discoloured or lifting
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Bishop's Waltham?

Bishop's Waltham and the surrounding area

Bishop's Waltham is about 5 miles north-east of Hedge End, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Bishop's Waltham to London (61 miles away).

Here we cover the SO32 postcode area. Whether you live on High Street, St Georges's Square and Station Road or anywhere nearby, we can come to you. Being close to the B2177 and B3035, Bishop's Waltham is easy for our technicians to reach. Other places close to Bishop's Waltham include Ashton (1 mile north), Waltham Chase (2 miles south), Durley Street (2 miles west), Wintershill (2 miles west) and Upham (2 miles north-west). We also work in nearby towns such as Winchester (8 miles north-west), Gosport (11 miles south), Havant (12 miles south-east), Eastleigh (6 miles west), Fareham (7 miles south) and Horndean (9 miles east).

Near you in Bishop's Waltham

Typical jobs here are in homes near The Crown Hotel, Bishop's Waltham Junior School and Swanmore College of Technology. For rail, the closest station is Botley station, about 3.3 miles south-west. Other landmarks nearby include Bishop's Waltham Museum (within half a mile south-west) and Moorgreen Hospital (5.1 miles west). Not far away are Bishops Waltham Branch LNR and Beacon Hill.

Map of Bishop's Waltham © OpenStreetMap contributors

Bath repair in Bishop's Waltham, done in place

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can typically use the bath the following day. Typical jobs include cracks in an acrylic bath and a kit repair that didn’t last, on acrylic, cast iron enamel and pressed steel enamel.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Bishop's Waltham (SO32)
County
Hampshire
Guarantee
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

Different materials, different repairs

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

FAQs for Bishop's Waltham

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Do you come to Bishop's Waltham?

Yes. We cover the whole UK and come to Bishop's Waltham. Send pictures and we will quote, or call 0345 017 0787.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Which areas do you work in?

All of Hampshire, and the rest of the UK. Travel is included in the price.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Tell us about it when you send pictures.

What bath repair costs

Repairs from £95. There is no charge for travel to Bishop's Waltham. The price depends on:

  • Any earlier repairs that need removing first
  • Access to the area
  • Whether we combine several jobs
  • The colour and finish to match

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what we find most useful:

  • A clear, close picture of the problem area
  • Where you are, by postcode
  • Natural light rather than flash
  • One picture of the entire bath

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.

When to call us in Bishop's Waltham

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

Common reasons people in Bishop's Waltham contact us include:

  • Deep scratches in acrylic
  • A chipped rim or side
  • An old repair that has yellowed or come loose
  • A chip where the taps sit

What to look for in a quote

  • What aftercare is recommended
  • The length of the guarantee and what it covers
  • Who turns up on the day
  • What prep work is covered

Our hiring checklist

When we would advise against a repair

To be straight with you, there are a few things a repair will not fix:

  • Rust that has eaten right through a steel bath
  • Wear across the whole surface, which needs re-enamelling
  • Leaking fittings, which need a plumber

Send us photos and we’ll tell you honestly before booking.

Materials we repair

  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic

How it works

The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Ensure the room can be ventilated
  • Move bottles, mats and clutter away from the area

Getting a price

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Get a fixed quote

Related advice

Should you replace it?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why book with us

  • Work done at your home or business
  • Every repair guaranteed for a year
  • Everything repaired in place
  • CHAS, Constructionline and SafeContractor accredited

See our pricing or guide to resurfacing and replacement costs.

Aftercare tips

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Get any new chip repaired before it rusts
  • Rinse the bath after use, especially in hard water areas

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.