North Lincolnshire · England
Bath chip & crack repair in Blaxton, North Lincolnshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Blaxton, carried out at your home and guaranteed for a year.
- Repairs from £95
- A hole punched through by something heavy
- Chips on the rim or sides
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
How we handle bath repair in Blaxton
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Typical jobs include a hole punched through by something heavy and rust spots around the plughole, on roll-top & freestanding, whirlpool & spa baths and cast iron enamel.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Blaxton (DN9)
- Area hub
- North Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath repair in Blaxton
What does bath repair cost?
Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your DN9 postcode.
Do you cover Blaxton?
Yes. We work across the UK and travel to Blaxton and the rest of North Lincolnshire. Send photos and we will quote, or call 0345 017 0787.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
What happens once I’ve sent photos?
You’ll get a fixed quote back. You’re under no obligation.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Is a cracked acrylic bath repairable?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Signs you need bath repair in Blaxton
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
People normally call us when they notice something like this:
- Cracks in an acrylic bath
- A hole punched through by something heavy
- Chips under the taps
- Chips caused by builders
Questions to ask before you book
- What happens if they find more damage
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
- When it can be used again
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- How hard the colour is to match
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- One sharp close-up of the damage
Email us pictures of the damage and a wider shot of the entire item, with your DN9 postcode, and we will reply with a fixed quote.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Towns and villages near Blaxton
Other services in Blaxton
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a few hours, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can normally use the bath the day after.
How to prepare
- Open a window if you can
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
Get a quote
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why Blaxton customers choose us
- Colours mixed by hand to suit your surface
- One visit for most repairs
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
Read our prices page or resurfacing vs replacement cost guide.
Where we work around Blaxton
Blaxton is about 5 miles east of Doncaster, in North Lincolnshire. Whether you’re in the middle of Blaxton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 90 towns and villages across North Lincolnshire, from the larger towns to small villages. Our jobs stretch from Blaxton to Leeds (about 32 miles away).
Postcode districts we cover here: DN9. Whether you live on New Street, Park Lane and Blue Bell Court or anywhere nearby, we can come to you. Neighbouring places we cover include Finningley (1 mile south), Misson (4 miles south), Newington (4 miles south), Everton (6 miles south) and Drakeholes (7 miles south). We also work in nearby towns such as Scunthorpe (15 miles east), Bottesford (13 miles east), Frodingham (15 miles north-east), Crosby (15 miles north-east), Epworth (7 miles east) and Yaddlethorpe (14 miles east).
Around Blaxton
Around Blaxton, we work in homes near St Oswald's CofE Academy, Church of Holy Trinity and St Oswald and The Hayfield School. Other landmarks nearby include Hospital of St Mary Magdalene (4.9 miles south). Green spaces nearby include Potteric Carr Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
