Nottinghamshire · England
Bath Repair for Misson homes
Fixed-price bath repair in Misson and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Deep scratches in acrylic
- Chips under the taps
How we handle bath repair in Misson
A damaged bath doesn’t have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. If you are dealing with scuffs and scratches in the surface and chips along the edge of the bath, we can help.
All our work is covered by our one-year guarantee, wherever you are in Nottinghamshire.
- Where
- Misson (DN10)
- Region
- Nottinghamshire
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we will say what we think.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse the bath after use, especially in hard water areas
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Nearby places to Misson
Other services in Misson
Can I fix it myself?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Our work in Misson
Misson is about 8 miles south-east of Doncaster, in Nottinghamshire. We visit clients in Misson, so nothing has to leave your home. Misson is one of 329 places in Nottinghamshire we cover. You can also see our page for Leeds, about 35 miles away.
We cover every part of the DN10 postcode area. We regularly work on streets such as High Street, Station Road and Middle Street. Nearby, we also work in Newington (2 miles south-west), Everton (2 miles south), Finningley (3 miles north), Drakeholes (3 miles south) and Mattersey Thorpe (3 miles south). Larger places within reach include Worksop (11 miles south-west), Retford (9 miles south), Kilton (11 miles south-west), Bracebridge (12 miles south-west), Bawtry (3 miles south-west) and Carlton in Lindrick (9 miles south-west).
Around Misson
In Misson, that means homes near Misson Primary School and Church of St John The Baptist And Boundary Wall, among other places. Further afield, we also cover the area around Hospital of St Mary Magdalene (2.8 miles south-west).
Repair or replace in Misson?
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.
Why us?
- Everything repaired in place
- Same prices wherever you are
- Colour mixed on the day to match
- Typically one visit, start to finish
Read our pricing or bath cost comparison.
Landlords, agents and businesses in Misson
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Common problems we fix in Misson
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Send us a picture if you notice any of these:
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
- Impact holes in acrylic
- A chipped rim or side
Questions to ask before you book
- What preparation is included
- Whether the colour is mixed to match
- How the room is protected while they work
- A fixed quote, and whether VAT is included
Misson questions
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you repair a crack in an acrylic bath?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Before we arrive
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
