North Yorkshire · England
Bath Repair in Brackenthwaite
Fixed-price bath repair in Brackenthwaite and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- A chip where the taps sit
Bath repair in Brackenthwaite, done in place
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Our repair technicians work on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding, and the jobs we see most are a kit repair that didn’t last and a chip where the taps sit.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Brackenthwaite (HG3)
- Area hub
- North Yorkshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we take into account:
- Any earlier repairs that need removing first
- The colour and finish to match
- How easy the damage is to reach
- The type of damage
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
Before you send photos, a few simple things make all the difference:
- The material, if you know it
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- A photo taken from further back
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Do you need bath repair in Brackenthwaite?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Signs it’s time to call us include:
- Chips along the edge of the bath
- Cracks in an acrylic bath
- A kit repair that didn’t last
- Damage beneath the taps
What to look for in a quote
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Nearby places to Brackenthwaite
Also in Brackenthwaite
FAQs for Brackenthwaite
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
What happens after I send pictures?
We come back with a fixed quote, plus dates. There is no obligation to book.
How long does the repair take to cure?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Honest limits
To be straight with you, some problems need a different fix:
- Cracks in acrylic we can’t reach from underneath
- Metal that has corroded all the way through
- Wear across the entire surface, which needs re-enamelling
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Brackenthwaite
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
Get a quote
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
What you get with us
- Honest advice, even when it means no job
- Colour mixed on the day to match
- A fixed quote before you book
- Most jobs done in one visit
Take a look at our full price list or resurfacing vs replacement cost guide.
Landlord and trade work in Brackenthwaite
If you manage property in Brackenthwaite, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Covering Brackenthwaite
Brackenthwaite is about 3 miles south-west of Harrogate, in North Yorkshire. We visit homes and businesses in Brackenthwaite and the surrounding area, so nothing has to leave your home. Our technicians cover 626 places in North Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 10 miles away.
Here we cover the HG3 postcode area. Close by, we cover Beckwith (1 mile north), Burn Bridge (1 mile east), North Rigton (1 mile south), Beckwithshaw (1 mile north-west) and Pannal (2 miles east). We also work in nearby towns such as Harrogate (3 miles north-east), Knaresborough (6 miles north-east), Ripon (12 miles north), Tadcaster (13 miles east), Starbeck (4 miles north-east) and Bilton (4 miles north).
Landmarks near Brackenthwaite
Locally, our jobs take us to homes close to RHS Garden Harlow Carr, The Squinting Cat pub and Rossett School. For rail, the closest station is Pannal station, roughly 1.6 miles east of the centre. Nearby you’ll also find John O'Gaunt's Castle (4.3 miles north-west) and Harrogate District Hospital (3.4 miles north-east). For a walk, there’s Great Alms Cliff.
About our accreditations · Every repair comes with a one-year guarantee.
