North Yorkshire · England
Bath Re-enamelling in Bramelane
Full bath re-enamelling and resurfacing in Bramelane, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- Chips and rust in more than one place
About our bath re-enamelling in Bramelane
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We are frequently asked to fix a peeling or bubbling previous coating and thin, worn enamel in places, in acrylic baths, pressed steel baths and Victorian roll-tops.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Bramelane (HG3)
- Area hub
- North Yorkshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs straight away
- Store bottles off the bath
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
How we price bath re-enamelling
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- What the surface is made of
- Any earlier repairs that need removing first
- Doing more than one item at once
- How much damage there is
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
You can usually get a fixed quote without us visiting. To help us price it:
- A wider photo showing the entire bath
- A clear, close picture of the problem area
- Details of any past repairs
- Where you are, by postcode
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
What you get with us
- A year’s guarantee on all work
- Rooms protected and left tidy
- Work done at your home or business
- Colours mixed by hand to suit your surface
Read our pricing and bath cost comparison.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What else we do in Bramelane
Landlord and trade work in Bramelane
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Common questions in Bramelane
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your HG3 postcode.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you work in Bramelane?
Yes. We work across the UK and travel to Bramelane. Send photos and we’ll quote, or call 0345 017 0787.
Can a failed resurfacing be redone?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
- Steel that has corroded right through
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Common problems we fix in Bramelane
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Common reasons people in Bramelane contact us are:
- A coating lifting around the plughole
- Stains that won’t shift
- Several chips and rust patches
- A roll-top that’s seen better days
Before you book anyone
- Whether the price covers travel
- A fixed price, and whether VAT is included
- How soon you can use it again
- Whether a trained technician does the job
Where we work around Bramelane
Bramelane is about 5 miles north of Otley, in North Yorkshire. Across the HG3 area, a technician comes to you. Bramelane is one of 626 towns and villages in North Yorkshire we cover. Our nearest city page is Leeds, about 13 miles away.
We cover every part of HG3 and the streets around it. Neighbouring places we cover include Bland Hill (1 mile south-east), Jack Hill (1 mile south-west), Lindley (4 miles south-east), Farnley (4 miles south) and Braythorn (4 miles south-east). Larger places within reach include Harrogate (6 miles east), Knaresborough (9 miles east), Skipton (13 miles west), Ripon (12 miles north-east), Starbeck (8 miles east) and Bilton (6 miles east).
What’s near Bramelane
Around Bramelane, we work in homes near The Sun Inn and Church of St Lawrence and the streets around them. Further afield, we also cover the area around Wharfedale Hospital (4.6 miles south) and John O'Gaunt's Castle (0.9 miles north-east).
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Getting a price
Send us photos of the damage and one of the entire item, with your HG3 postcode, and we’ll come back with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
