Hampshire · England
Bath Repair for Bramshaw homes
Fixed-price bath repair in Bramshaw and the surrounding area, usually in one visit and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Impact holes in acrylic
How we handle bath repair in Bramshaw
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Common call-outs are for impact holes in acrylic and a failed DIY repair that’s discoloured or lifting, on acrylic, roll-top & freestanding and pressed steel enamel.
Every repair comes with a one-year guarantee, wherever you are in Hampshire.
- Area
- Bramshaw (SO43)
- Region
- Hampshire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Bramshaw
Bramshaw is about 5 miles west of Totton, in Hampshire. Clients in Bramshaw get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Bramshaw is one of 683 towns and villages in Hampshire we cover. Our nearest city page is London, about 76 miles away.
All of SO43 is covered, from the main roads to the quietest streets. Main roads around Bramshaw include the B3079, which makes travel easy. Other places close to Bramshaw include Nomansland (1 mile north-west), Landford (2 miles north-west), Canada (2 miles north-east), Brook (2 miles south) and Plaitford (2 miles north). Further out, we also cover Winchester (15 miles north-east), Eastleigh (12 miles east), Totton (5 miles east), Chandler's Ford (10 miles east), Hedge End (14 miles east) and Lymington (13 miles south).
Near you in Bramshaw
Locally, our jobs take us to homes close to Church of St Peter and the streets around them. Nearby you’ll also find Tatchbury Mount Hospital (4.1 miles east). For a walk, there is Copythorne Common.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Places near Bramshaw
What else we do in Bramshaw
Honest limits
In fairness, some problems need a different fix:
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
What bath repair costs
Repairs from £95. Prices are worked out job by job. The main factors are:
- The material and finish
- Whether we combine several jobs
- The size and number of damaged areas
- What kind of damage it is
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed price
Before you send photos, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- The material, if you know it
- A close-up of the damage, in focus
- A wider photo showing the whole bath
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Repairing versus replacing in Bramshaw
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. We charge the same wherever you are, so there is no premium for Bramshaw. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Same prices wherever you are
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
See our prices page or guide to resurfacing and replacement costs.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Protect the bath with a towel when doing jobs nearby
- Rinse the bath after use, especially in hard water areas
- Make sure an acrylic bath is firm underfoot
- Keep metal cans and razors off the surface
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Signs you need bath repair in Bramshaw
A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the base flex until it cracks.
If you can see any of these, send us a picture:
- A chip where the taps sit
- Scuffs and scratches in the surface
- Rusty patches near the plughole
- Impact holes in acrylic
Before booking anyone
- How your room will be protected
- Whether the colour is mixed to match
- How changes to the job are handled
- Whether cleaning and preparation are in the price
How it works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage from start to finish. Before we go, we will explain how long to leave it and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Let us know if it has been repaired before
Getting a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
FAQs for Bramshaw
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
How long before I can use the bath?
Normally by the following day, depending on the repair.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
What happens if you find more damage?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
About our accreditations · Every repair comes with a one-year guarantee.
