Hampshire · England
Bath chip & crack repair in Canada, Hampshire
Bath repair in and around Canada: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Impact holes in acrylic
Bath repair at your home in Canada
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Typical jobs include chips along the edge of the bath and chips under the taps, in whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
You get a one-year guarantee, the same in Canada as everywhere else we work.
- Area
- Canada (SO51)
- Region
- Hampshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Canada and nearby
Canada is about 5 miles north-west of Totton, in Hampshire. Our technicians come to homes and businesses in Canada, so nothing has to leave your home. Our repair technicians cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Canada to London (75 miles away).
Every address in SO51 is within our area. If you’re just outside Canada, we cover West Wellow (1 mile north), Blackhill (1 mile east), East Wellow (1 mile east), Newbridge (2 miles south) and Plaitford Green (2 miles north). Further out, we also cover Winchester (14 miles north-east), Eastleigh (11 miles east), Totton (5 miles south-east), Chandler's Ford (9 miles east), Hedge End (13 miles east) and Lymington (14 miles south).
Near you in Canada
Locally, our jobs take us to homes close to Rockingham Arms and Wellow School. Canada’s nearest station is Romsey station, about 4.6 miles north-east of the centre. A little further out are Tatchbury Mount Hospital (3.5 miles south-east). The countryside around Canada includes Copythorne Common.
Towns and villages near Canada
Also in Canada
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair can’t fix:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
How to care for the repair
Simple care helps the repair last. We recommend:
- If an acrylic bath flexes, have its feet adjusted
- Rinse the bath after use, especially in hard water areas
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave a fresh chip for long
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
What affects the price in Canada
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Where the damage is and how we get to it
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
- The material, if you know it
- A coin beside the damage so we can judge size
For a price in Canada, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
What we do, step by step
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the following day.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
- Tell us about parking, stairs or access
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Questions from Canada
Do you cover Canada?
Yes. We cover the entire UK and travel to Canada. Send photos and we will quote, or call 0345 017 0787.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
How do I get a price for bath repair in Canada?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Signs you need bath repair in Canada
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Clients normally contact us about:
- Rusty patches near the plughole
- A cracked acrylic bath
- Scratches you can feel with a fingernail
- Impact holes in acrylic
Questions to ask before you book
- What the guarantee covers, and for how long
- Whether the price covers travel
- A fixed price, and whether VAT is included
- Aftercare advice
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
What you get with us
- Fixed prices from your pictures
- One-year guarantee on every repair
- Colour-matched on site
- One visit for most repairs
Read our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
