Wiltshire · England
Bath chip & crack repair in Landford, Wiltshire
Bath repair in Landford without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Rust by the waste and overflow
- A chipped rim or side
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Bath repair at your home in Landford
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour matched so it blends in. Common call-outs are for rust by the waste and overflow and cracks in an acrylic bath, across acrylic, pressed steel enamel and cast iron enamel.
A one-year guarantee comes as standard.
- Location
- Landford (SP5)
- Area hub
- Wiltshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. It usually takes a few hours, and you are welcome to carry on with your day while we work.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Get a quote
Send us photos of the damage and one of the whole item, and tell us you’re in Landford, and we’ll come back with a fixed quote.
Related advice
Places near Landford
More services for Landford
Should you replace it?
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- A fixed quote before booking
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
See our pricing or guide to resurfacing and replacement costs.
What affects the price in Landford
Repairs from £95. You won’t pay by the hour. The price is based on:
- How many items we do on one visit
- The material and finish
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Details of any past repairs
- The material, if you know it
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Landlord and trade work in Landford
We work for landlords, letting agents and housing providers in Landford as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we cannot reach from underneath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
FAQs for Landford
How long does the repair take to cure?
Most baths can be used the day after. We’ll tell you the exact curing time when we finish.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Is a holed acrylic bath repairable?
Normally. Photos of the hole and the underside help us check.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Landford.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Rinse it down after each bath
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you’re working above it
- Clean with warm water and a mild detergent
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Where we work around Landford
Landford is about 7 miles north-west of Totton, in Wiltshire. We visit homes and businesses in Landford and the surrounding area, so there’s no workshop to go to. We cover all 425 towns and villages across Wiltshire, from the larger towns to small villages. Our jobs stretch from Landford to London (76 miles away).
Our repair technicians cover all of the SP5 postcode area. Streets in the area include Lyndhurst Road, Beech Grange and Pine Close. Close by, we cover Nomansland (1 mile south), Hamptworth (1 mile north-west), Plaitford (1 mile east), Bramshaw (2 miles south-east) and Canada (2 miles east). Within a short drive, we also cover Salisbury (10 miles north-west), Amesbury (15 miles north-west), Bugmore (9 miles north-west), Milford (9 miles north-west), Old Sarum (12 miles north-west) and Harnham (9 miles north-west).
What’s near Landford
Around Landford, we work in homes near The New Forest CofE (VA) Primary School and Church of St Andrew, among other places. Nearby you’ll also find Downton Moot Close (5 miles west) and Tatchbury Mount Hospital (5.3 miles south-east). For a walk, there is Copythorne Common.
About our accreditations · Every repair comes with a one-year guarantee.
