Wiltshire · England
Bath chip & crack repair in Dursley, Wiltshire
We travel to Dursley for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
Bath repair at your home in Dursley
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. You can usually use the bath the following day. We are frequently asked to fix hairline or through cracks in acrylic and snagging damage from a refit, across whirlpool & spa baths, acrylic and cast iron enamel.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Location
- Dursley (BA13)
- County
- Wiltshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Dursley?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Rooms protected and left tidy
- Fixed prices from your photos
- We will tell you if it’s not worth repairing
- Everything repaired in place
Read our pricing and resurfacing vs replacement cost guide.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- If an acrylic bath flexes, have its feet adjusted
- Rinse it down after each bath
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
More services for Dursley
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
What we’re called out for in Dursley
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Signs it’s time to call us include:
- A chip where the taps sit
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
- Deep scratches in acrylic
Before you book anyone
- How soon you can use it again
- What preparation is included
- What happens if they find more damage
- The length of the guarantee and what it covers
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Where we work around Dursley
Dursley is about 2 miles north of Westbury, in Wiltshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Dursley is one of 425 towns and villages in Wiltshire we cover.
Our technicians cover all of the BA13 postcode area. Neighbouring places we cover include Hawkeridge (1 mile south-west), Yarnbrook (1 mile north-east), Heywood (1 mile east), Westbury (2 miles south) and Dunge (2 miles east). We also work in nearby towns such as Chippenham (12 miles north), Calne (14 miles north-east), Devizes (10 miles north-east), Melksham (7 miles north-east), Warminster (6 miles south) and Corsham (10 miles north).
What’s near Dursley
Around Dursley, we work in homes near Church of Holy Trinity, North Bradley CofE Primary School and Matravers School. The nearest railway station is Westbury station, about 1.3 miles south. Other landmarks nearby include The Woodland Heritage Museum (1.8 miles south-west) and West Wiltshire (2.3 miles north).
What bath repair costs
Prices start from £95. There is no area surcharge for Dursley. What changes the price is:
- Any earlier repairs that need removing first
- The type of damage
- Whether we combine several jobs
- The material and finish
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
Quotes from your photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- One picture of the entire bath
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Common questions in Dursley
Can you quote from photos?
Nearly always. If photos do not show enough, we’ll ask for another angle.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
How do I book?
Use the quote form or ring 0345 017 0787.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
For landlords and businesses
For anyone letting property in or around Dursley, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
How it works
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours. We leave the room clean.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the day after.
How to prepare
- Have a window or extractor fan available
- Point us to the nearest place to park
- Let us know about parking or access
How to get a price
Send us pictures of the damage and one of the entire item, and tell us you are in Dursley, and we’ll reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
