Gloucestershire · England

Bath Repair in Bread Street

Fixed-price bath repair in Bread Street and the surrounding area, done in a single visit in most cases.

  • Repairs from £95
  • A hole punched through by something heavy
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Bread Street

Bath repair in Bread Street without replacing anything

Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Typical jobs include rust spots around the plughole and impact holes in acrylic, across acrylic, cast iron enamel and whirlpool & spa baths.

You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.

Location
Bread Street (GL6, GL5)
Region
Gloucestershire
Cover
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Prices and what affects them

Prices start from £95. We don’t charge extra for travel to Bread Street. The price comes down to:

  • Any earlier repairs that need removing first
  • Doing more than one item at once
  • The size and number of damaged areas
  • Access to the area

We charge the same wherever you are, so there is no premium for Bread Street. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed quote

Two or three clear pictures are typically enough. Try to include:

  • Good light, ideally daylight, without flash glare
  • One sharp close-up of the damage
  • Any earlier repairs or coatings
  • A wider photo showing the entire bath

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed quote, not an estimate.

Honest limits

It helps to know what we can’t do:

  • Wear across the whole surface, which needs re-enamelling
  • Acrylic cracks with no access behind them
  • Flexing caused by a failed cradle or loose feet

Send us pictures and we will tell you honestly before booking.

What we work on

  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel

Signs you need bath repair in Bread Street

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

People normally call us after spotting something like this:

  • Chips under the taps
  • A failed DIY repair that’s discoloured or lifting
  • A cracked acrylic bath
  • Rust spots around the plughole

What to look for in a quote

  • What aftercare is recommended
  • Who will actually do the work
  • Whether the price is fixed and includes VAT
  • Whether the price covers travel

How to compare quotes

The process

On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take two to three hours for most chips, tidy-up included.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the day after.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Make sure the room can be ventilated
  • Mention any earlier repairs or resurfacing

Ask for a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a free quote

Read more

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Should you replace it?

Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • A year’s guarantee on all work
  • Normally one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited
  • Nothing taken out or refitted

See our pricing and bath cost comparison.

Covering Bread Street

Bread Street is about 1 mile north-west of Stroud, in Gloucestershire. We travel to clients in Bread Street and nearby villages, so there is no workshop to go to. Bread Street is one of 470 towns and villages in Gloucestershire where we work. We work right across the region, from Bread Street to Birmingham (51 miles away).

We work across the GL6 and GL5 postcode area and the streets around it. Neighbouring places we cover include Ruscombe (1 mile north), Randwick (1 mile north-west), Whiteshill (1 mile north-east), Cashes Green (1 mile south-west) and Stroud (1 mile south-east). Larger places within reach include Cheltenham (12 miles north-east), Gloucester (6 miles north), St Paul's (12 miles north-east), Cirencester (12 miles east), Lansdown (12 miles north-east) and Bishop's Cleeve (15 miles north-east).

Local landmarks in Bread Street

Around Bread Street, we work in homes near Stratford Park, Star Inn and Archway School. Other local landmarks include Church of St Paul (less than half a mile north-east), British School (1.2 miles south-east) and Randwick Church of England Primary School (within half a mile west). The nearest railway station is Stroud station, about 1.3 miles south-east. A little further out are Standish Hospital (1.2 miles west) and Harescombe Castle (2.4 miles north). Green spaces nearby include Haresfield Beacon and Frome Banks.

Map of Bread Street © OpenStreetMap contributors

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

Common questions in Bread Street

Do you work in Bread Street?

Yes. We work across the UK and travel to Bread Street. Send pictures and we’ll quote, or call 0345 017 0787.

How long does the repair take to cure?

Normally the following day. We will tell you the exact curing time when we finish.

Can rust on a bath be repaired?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

What does bath repair cost?

Prices start from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.

Is there a guarantee?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Just add the extra items to your photos and we’ll quote them together.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Landlords, agents and businesses in Bread Street

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We carry out planned and one-off repairs for housing associations and facilities teams in Gloucestershire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.