Lancashire · England

Bath Repair in Bretherton

Bath repair in Bretherton without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • A kit repair that didn’t last
  • A chipped rim or side
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Bretherton

Bath repair at your home in Bretherton

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. We are often asked to fix impact holes in acrylic and deep scratches in acrylic, in pressed steel enamel, cast iron enamel and acrylic.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Bretherton (PR26)
County
Lancashire
Warranty
A year, on every repair
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026

Common problems we fix in Bretherton

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

The things clients normally mention when they call are:

  • Snagging damage from a refit
  • A kit repair that didn’t last
  • Deep scratches in acrylic
  • Chips on the rim or sides

What your quote should include

  • How your room will be protected
  • Whether the price covers travel
  • When it can be used again
  • Is the price fixed, and does it include VAT?

How to compare quotes

The process

Arrival times are agreed in advance. On site, it takes a morning or an afternoon in most cases. We leave the room clean and you’ll know when it can be used.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, usually by the day after, the bath is ready to use.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Mention if the room is upstairs or in a flat
  • Mention any parking restrictions or tricky access

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Read more

When a repair is not the answer

We will always be straight with you, so here’s what a repair will not do:

  • A bath worn all over, where resurfacing makes more sense
  • Acrylic cracks with no access behind them
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Not sure? Send pictures and we will give you a straight answer before booking.

What we work on

  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding

FAQs for Bretherton

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Do the materials smell?

Expect a mild smell while we’re working.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

How long before I can use the bath?

Normally by the following day, depending on the repair.

Do you charge for travel?

We do not add a call-out fee. Your fixed quote includes everything.

How much does bath repair cost in Bretherton?

Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Bretherton.

How to look after the repair

Much of the damage we repair could have been avoided. These habits help:

  • Give the bath a quick rinse after use
  • Check that an acrylic bath does not move when you stand in it
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Get any new chip repaired before it rusts

Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.

How we price bath repair

Repairs from £95. We do not charge extra for travel to Bretherton. The price comes down to:

  • What kind of damage it is
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match
  • The size and number of damaged areas

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed quote

You can take the pictures on your phone. Just ensure we can see:

  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • Any details about the material
  • A coin or ruler next to the damage for scale

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.

For landlords and businesses

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Covering Bretherton

Bretherton is about 4 miles west of Leyland, in Lancashire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Bretherton is one of 482 places in Lancashire where we work. Our nearest city page is Liverpool, about 20 miles away.

Every address in PR26 is within our area. Whether you live on South Road, Bamfords Fold and Marl Cop or a nearby road, we can come to you. Bretherton is on the B5247, which makes it straightforward to reach. Other places close to Bretherton include Croston (1 mile south-east), Wymott (2 miles east), Moss Side (2 miles north-east), Ulnes Walton (3 miles south-east) and Midge Hall (3 miles north-east). We also work in nearby towns such as Preston (7 miles north-east), Chorley (7 miles east), Lytham St Anne's (10 miles north-west), Bamber Bridge (6 miles north-east), Leyland (4 miles east) and Fulwood (8 miles north).

Near you in Bretherton

In Bretherton, that means homes near Bank Hall Gardens, St John the Baptist's Church and Bishop Rawstorne Church of England Academy, among other places. For rail, the closest station is Croston station, roughly 0.9 miles south-east. Well-known places in the area include Greaves Hall (5.1 miles west). Not far away are Mere Sands Wood and Martin Mere.

Map of Bretherton © OpenStreetMap contributors

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.