Warwickshire · England
Bath chip & crack repair in Broom, Warwickshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Broom, carried out at your home and guaranteed for a year.
- Repairs from £95
- Hairline or through cracks in acrylic
- A chip where the taps sit
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Bath repair in Broom without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you’re dealing with a failed DIY repair that’s discoloured or lifting and a cracked acrylic bath, we can usually put it right, whatever the material.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Broom (B50)
- Region
- Warwickshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Broom
Other services in Broom
Honest limits
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
Send us pictures and we will tell you honestly.
What we work on
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Nothing taken out or refitted
- A fixed quote before you book
- Most jobs done in one visit
- Colour mixed on the day to match
Read our prices page and bath cost comparison.
FAQs for Broom
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you work in Broom?
We do. We send a technician to Broom for every job, with no extra charge for travel.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Can you quote from pictures?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
When can I have a bath again?
Generally the following day. We’ll tell you the exact curing time when we finish.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you need bath repair in Broom?
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Most people contact us when they notice something like this:
- Damage done while the bathroom was being fitted
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
Questions to ask before you book
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- Who turns up on the day
- Whether there are any call-out or travel charges
Broom and nearby
Broom is about 7 miles west of Stratford-upon-Avon, in Warwickshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Broom is one of 324 towns and villages in Warwickshire we cover. We work right across the region, from Broom to Birmingham (about 20 miles away).
Every address in B50 is covered. Local streets include Malt House Close, Mill Lane and Bidford Road. We also travel to Bidford-on-Avon (1 mile south-east), Salford Priors (2 miles south-west), Barton (2 miles south-east), Ardens Grafton (2 miles north-east) and Marlcliff (2 miles south). We also work in nearby towns such as Warwick (14 miles north-east), Stratford-upon-Avon (7 miles east), Alcester (3 miles north), Shipston-on-Stour (13 miles south-east), Wellesbourne (12 miles east) and Studley (7 miles north).
Around Broom
Around Broom, we work in homes near Broom Tavern, Church of St Milburga and Bidford-on-Avon CofE Primary School, among other places. Nearby you will also find Coughton Danes Bank (4.6 miles north) and Roman Alcester Museum (2.6 miles north). Not far away are River Arrow Nature Reserve.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- If an acrylic bath flexes, have its feet adjusted
- Protect the bath with a towel when doing jobs nearby
- Do not leave razors or cans standing in the bath
- Have new chips seen to early
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
What happens on the day
We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the following day, the bath is ready to use.
How to prepare
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Open a window if you can
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say right away if a repair is the right fix.
Advice
Landlord and trade work in Broom
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
