Kent · England
Bath chip & crack repair in Broomhill, Kent
Bath repair in Broomhill without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
How we price bath repair
Repairs from £95. We price every job individually, from your photos. The main factors are:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- How hard the colour is to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send photos for a quote
Phone pictures are fine. Make sure they show:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Bath repair at your home in Broomhill
Most of our bath repairs take a few hours, and the bath is back in use the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. Whether it’s cracks in an acrylic bath and impact holes in acrylic, we can typically put it right, whatever the material.
All our work is covered by our one-year guarantee, wherever you are in Kent.
- Location
- Broomhill (CT3)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take a morning or an afternoon, including clearing up.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the next day, the bath is ready to use.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
Getting a price
For a price in Broomhill, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Signs you need bath repair in Broomhill
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Look out for any of the following:
- Hairline or through cracks in acrylic
- Damage beneath the taps
- A hole punched through by something heavy
- Snagging damage from a refit
Questions to ask before you book
- How to care for the finish
- How the room is protected while they work
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the photos show
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we can’t reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Looking after it afterwards
It’s all simple stuff:
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Your questions about bath repair in Broomhill
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and we’ll quote them together.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Can rust on a bath be repaired?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If we need another angle, we will ask.
What areas do you cover?
Across the UK, so Broomhill is covered. Our prices are the same everywhere.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Also near Broomhill
Other services in Broomhill
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Where we work around Broomhill
Broomhill is about 6 miles east of Canterbury, in Kent. Wherever you are in the CT3 postcode area, a technician comes to you. Broomhill is one of 922 towns and villages in Kent where we work. You can also see our page for London, about 59 miles away.
Our visits in CT3 are booked in the same way as anywhere else. Local streets include Wenderton Lane, North Court Road and Miles Court, all of which we cover. We also travel to Wingham (1 mile south), Shatterling (1 mile east), Well Head (1 mile south), Perry (1 mile north-east) and Wingham Green (1 mile south-west). Larger places within reach include Canterbury (6 miles west), Margate (10 miles north-east), Dover (10 miles south), Folkestone (14 miles south), Ramsgate (9 miles north-east) and Broadstairs (11 miles north-east).
Near you in Broomhill
Typical jobs here are in homes near The Red Lion pub, Wingham Primary School and St Mary's Church and the streets around them. For rail, the closest station is Adisham station, roughly 2.7 miles south of the centre. Well-known places in the area include St Martins Hospital (4.8 miles west). Green spaces nearby include Monk's Wall nature reserve.
About our accreditations · Every repair comes with a one-year guarantee.
