Wiltshire · England
Bath chip & crack repair in Bulkington, Wiltshire
Problem with your bath in Bulkington? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- A failed DIY repair that’s discoloured or lifting
About our bath repair in Bulkington
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We regularly repair acrylic, cast iron enamel and pressed steel enamel, and people most frequently call us about cracks in an acrylic bath and chips under the taps.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Area
- Bulkington (SN10)
- Area hub
- Wiltshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Bulkington
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
I tried a repair kit. Can you fix it?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Do you cover Bulkington?
Yes, we do. We send a technician to Bulkington for every job, and the price is the same as everywhere else.
How much does bath repair cost in Bulkington?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can you repair something that is been repaired before?
Usually, yes. We remove the old repair before doing a new one.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Fixed prices from your photos
- Same prices wherever you are
- Every repair guaranteed for a year
- We leave the room as we found it
Read our full price list and guide to resurfacing and replacement costs.
Also in Bulkington
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath doesn’t move when you stand in it
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Bulkington and nearby
Bulkington is about 4 miles south-east of Melksham, in Wiltshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Bulkington is one of 425 places in Wiltshire where we work. You can also see our page for Birmingham, about 80 miles away.
Every address in SN10 is covered. Whether you live on High Street and Chestnut Drive or a nearby road, a technician can come to you. Close by, we cover Townsend (1 mile east), Marston (2 miles south-east), Seend (2 miles north), Seend Cleeve (2 miles north-west) and Poulshot (2 miles north-east). Within a short drive, we also cover Trowbridge (5 miles west), Chippenham (9 miles north), Calne (9 miles north-east), Devizes (5 miles north-east), Westbury (6 miles south-west) and Melksham (4 miles north-west).
Landmarks near Bulkington
In Bulkington, that means homes near Christchurch, among other places. The closest station to Bulkington is Melksham station, about 4.7 miles north-west. Other landmarks nearby include Shane's Castle (3.9 miles north-east) and St Georges Hospital (3.4 miles west).
Common problems we fix in Bulkington
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
The things customers typically mention when they call include:
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
- Snagging damage from a refit
- Chips along the edge of the bath
What to look for in a quote
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- Aftercare advice
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
What bath repair costs
Prices start from £95. We price every job individually. The main factors are:
- How much damage there is
- Whether we combine several jobs
- What the surface is made of
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- One sharp close-up of the damage
- The material, if you know it
- A photo taken from further back
- Good light, ideally daylight, without flash glare
Send us a picture of the damage and a wider shot of the whole item, and tell us you are in Bulkington, and we will come back with a fixed quote.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which typically takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Ask for a price
To get a price, send two or three pictures using our quote form or ring us. We will say straight away whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
