Wiltshire · England
Bath chip & crack repair in Townsend, Wiltshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Townsend. Send photos for a free, fixed quote.
- Repairs from £95
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
Bath repair in Townsend without replacing anything
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. We work on roll-top & freestanding, cast iron enamel and pressed steel enamel, and common reasons people contact us are holes from dropped items and rust spots around the plughole.
Whatever the size of the job, it’s backed by a one-year guarantee in Townsend and across Wiltshire.
- Where
- Townsend (SN10)
- Area hub
- Wiltshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
We will always be straight with you, so here’s what a repair cannot fix:
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Covering Townsend
Townsend is about 3 miles south-west of Devizes, in Wiltshire. From the centre of Townsend to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Townsend is one of 425 places in Wiltshire where we work. Our nearest city page is Birmingham, about 79 miles away.
All of SN10 is within our area, from the main roads to the quietest streets. If you’re just outside Townsend, we cover Poulshot (1 mile north-east), Worton (1 mile south-east), Bulkington (1 mile west), Marston (1 mile south) and Seend (2 miles north-west). Further out, we also cover Trowbridge (7 miles west), Chippenham (9 miles north), Calne (8 miles north), Devizes (3 miles north-east), Westbury (8 miles south-west) and Melksham (4 miles north-west).
What’s near Townsend
Typical jobs here are in homes near Church of St Peter, among other places. Nearby you’ll also find Wiltshire Fire Defence And Brigades Museum (1.6 miles east) and Shane's Castle (2.6 miles north-east). For a walk, there is King's Play Hill.
- Parks and local facilities nearby include Kennet (2.9 miles north-east)
Do you need bath repair in Townsend?
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Contact us if you’ve noticed any of these:
- A failed DIY repair that is discoloured or lifting
- Rusty patches near the plughole
- Chips on the rim or sides
- Cracks in an acrylic bath
What to look for in a quote
- What preparation is included
- Whether they match the colour on site
- Who will actually do the work
- Whether the price is fixed and includes VAT
Places near Townsend
More services for Townsend
Repairing versus replacing in Townsend
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Townsend
- A year’s guarantee on all work
- Colour mixed on the day to match
- Nothing taken out or refitted
- Free fixed quotes from pictures
Read our prices page and guide to resurfacing and replacement costs.
The process
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Getting a price
Send us a picture of the damage and one of the entire item, with your SN10 postcode, and we will reply with a fixed price.
Related advice
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
FAQs for Townsend
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Are there extra charges for Townsend?
No. Our quotes include travel, and we charge the same wherever you are.
What areas do you cover?
All of Wiltshire, and the rest of the UK. There’s no extra charge for travel.
Can you quote from pictures?
Nearly always. If photos do not show enough, we will ask for another angle.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Landlord and trade work in Townsend
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Keeping it looking good
It’s all simple stuff:
- Rinse it down after each bath
- Don’t scrub with anything abrasive
- Get any new chip repaired before it rusts
- If an acrylic bath flexes, have its feet adjusted
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
