Hampshire · England
Bath chip & crack repair in Burley, Hampshire
Problem with your bath in Burley? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A chip where the taps sit
About our bath repair in Burley
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We are frequently asked to fix scratches you can feel with a fingernail and chips on the rim or sides, in whirlpool & spa baths, acrylic and cast iron enamel.
Every job is backed for twelve months in Burley and everywhere else. We return to put right any problem with the work.
- Location
- Burley (BH24)
- Region
- Hampshire
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Fix dripping taps early to stop staining and limescale
- Do not scrub with anything abrasive
- If an acrylic bath flexes, have its feet adjusted
- Clean with warm water and a mild detergent
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
Covering Burley
Burley is about 6 miles north of Christchurch, in Hampshire. We travel to clients in Burley and nearby villages, so you do not need to take anything anywhere. We cover 683 places across Hampshire, from the larger towns to small villages.
Here we cover the BH24 postcode area. Whether you live on The Mall, The Cross and Doveys Close or anywhere nearby, we can come to you. Neighbouring places we cover include Burley Street (1 mile north-west), Bagnum (2 miles west), Foulford (2 miles north-west), Crow (3 miles west) and Forest Corner (3 miles north-west). We also work in nearby towns such as Totton (11 miles north-east), Lymington (8 miles south-east), Romsey (15 miles north-east), Hythe (13 miles east), New Milton (5 miles south) and Ringwood (4 miles west).
Local landmarks in Burley
Around Burley, we work in homes near The Burley Inn, Church of St John the Baptist and Burley Primary School and the streets around them. For rail, the closest station is Sway station, roughly 5 miles south-east of the centre. Open spaces near Burley include Blashford Lakes and Linbrook Lake.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Towns and villages near Burley
Other services in Burley
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Burley use us as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
Repairing versus replacing in Burley
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
Why Burley customers choose us
- We will tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Nothing taken out or refitted
Take a look at our prices page or resurfacing vs replacement cost guide.
Burley questions
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Is a holed acrylic bath repairable?
Normally. Photos of the hole and the underside help us check.
Do you charge for travel?
We do not add a call-out fee. Your fixed price includes everything.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Do you need bath repair in Burley?
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
Most people get in touch when they notice something like this:
- A chipped rim or side
- Holes from dropped items
- Snagging damage from a refit
- An old repair that has yellowed or come loose
Comparing quotes
- Who will actually do the work
- What aftercare is recommended
- If travel is included in the price
- How soon you can use it again
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
