Cumbria · England
Bath Repair in Burneside
Bath repair for Burneside, without a refit. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Impact holes in acrylic
- Damage beneath the taps
Bath repair in Burneside without replacing anything
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. Whether it’s scuffs and scratches in the surface and damage beneath the taps, we can help.
Big or small, it’s backed by a one-year guarantee.
- Area
- Burneside (LA9)
- Area hub
- Cumbria
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Burneside: your questions answered
Do you cover the entire of Cumbria?
Across the UK, so Burneside is covered. Our prices are the same everywhere.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair a crack in an acrylic bath?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
When can I have a bath again?
Typically within a day, depending on the repair.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
For landlords and businesses
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Signs you need bath repair in Burneside
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
You may need us if you’ve spotted:
- A failed DIY repair that is discoloured or lifting
- Chips on the rim or sides
- Rusty patches near the plughole
- Impact holes in acrylic
What to look for in a quote
- Who turns up on the day
- What prep work is covered
- How soon you can use it again
- Aftercare advice
How the visit works
We work cleanly and quietly. Protection goes down first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Open a window if you can
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Related advice
Towns and villages near Burneside
What else we do in Burneside
When a repair isn’t the answer
It helps to know what we can’t do too:
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
What bath repair costs
Prices start from £95. You will not pay by the hour. The price is based on:
- Whether we combine several jobs
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
We charge the same wherever you are, so there’s no premium for Burneside. The job itself decides the price: the material, the amount of damage and how many items.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- The material, if you know it
- Something in shot to show the size
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Our work in Burneside
Burneside is about 2 miles north of Kendal, in Cumbria. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Burneside is one of 438 towns and villages in Cumbria we cover. Our nearest city page is Leeds, about 62 miles away.
Jobs in LA9 are booked in the same way as anywhere else. You’ll find streets such as New Road, Chapel Field and Howgill Close, all of which we cover. We also cover the places around Burneside: Bowston (1 mile north-west), Plumgarths (1 mile south-west), Kentrigg (1 mile south-east), Bonning Gate (1 mile west) and Plantation Bridge (2 miles north-west). Further out, we also cover Windermere (6 miles west), Grange-over-Sands (13 miles south-west), Ambleside (10 miles north-west), Bowness-on-Windermere (6 miles west), Sedbergh (10 miles east) and Milnthorpe (9 miles south).
Around Burneside
Our customers here include homes close to St Oswald's CofE Primary School, The Queen Katherine School and St Oswald's Church. Burneside has its own railway station: Burneside station. Further afield, we also cover the area around Quaker Tapestry Museum (1.9 miles south-east) and University Hospitals of Morecambe Bay NHS Foundation Trust (3.4 miles south). For a walk, there is Ratherheath Tarn and Scout Scar.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
