Cumbria · England

Bath chip & crack repair in Grange-over-Sands, Cumbria

Bath repair in Grange-over-Sands without the cost of replacing. Send us pictures for a fixed price, then book a visit.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Grange-over-Sands

Work for landlords and builders

We’re used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Bath repair at your home in Grange-over-Sands

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. We regularly repair acrylic, cast iron enamel and pressed steel enamel, and the jobs we see most are chips under the taps and deep scratches in acrylic.

A one-year guarantee comes as standard, so you are covered after the visit.

Where
Grange-over-Sands (LA11)
Area hub
Cumbria
Cover
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

What we do, step by step

We begin by going over the job with you. Then the area is sheeted and masked and we start. Allow a few hours, and we’ll tell you if anything changes.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, normally by the following day, the bath is ready to use.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Tell us about any previous repairs or coatings
  • Let us know which floor the room is on

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.

Get a fixed price

Read more

Signs you need bath repair in Grange-over-Sands

Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move.

Common reasons people in Grange-over-Sands contact us include:

  • Snagging damage from a refit
  • A failed DIY repair that is discoloured or lifting
  • Impact holes in acrylic
  • Chips on the rim or sides

Comparing quotes

  • Whether they match the colour on site
  • What happens if they find more damage
  • How to look after the finish
  • Whether cleaning and preparation are in the price

10 questions to ask before booking

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Avoid scourers, wire wool and gritty cream cleaners
  • A dripping tap stains enamel, so fix it early
  • Put a towel in the bath if you are working above it
  • Use a soft cloth and washing-up liquid for everyday cleaning

Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

Covering Grange-over-Sands

Grange-over-Sands is about 7 miles east of Ulverston, in Cumbria. Customers in Grange-over-Sands get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Grange-over-Sands is one of 438 towns and villages in Cumbria we cover. Our jobs stretch from Grange-over-Sands to Liverpool (54 miles away).

All of LA11 is within our area. Streets in the area include Main Street, Fell Drive and Fell Close, all of which we cover. Grange-over-Sands is on the B5271 and B5277, so it’s easy for us to reach. Neighbouring places we cover include Allithwaite (1 mile south-west), Kents Bank (1 mile south), Cartmel (1 mile north-west), Lindale (2 miles north-east) and Green Bank (2 miles north-west). Within a short drive, we also cover Barrow-in-Furness (13 miles west), Kendal (12 miles north-east), Ulverston (7 miles west), Hindpool (14 miles west), Salthouse (13 miles south-west) and Dalton-in-Furness (11 miles west).

Near you in Grange-over-Sands

Around Grange-over-Sands, we work in homes near Grange Fell Church and Cartmel Priory CofE School and the streets around them. The nearest railway station is Grange-Over-Sands station, about 0.8 miles north-east. Green spaces nearby include Tom Tarn and Humphrey Head.

Map of Grange-over-Sands © OpenStreetMap contributors

Prices and what affects them

Repairs from £95. We do not charge extra for travel to Grange-over-Sands. The price comes down to:

  • Any earlier repairs that need removing first
  • Doing more than one item at once
  • The colour and finish to match
  • What kind of damage it is

Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Send photos for a quote

Phone pictures are fine. Ensure they show:

  • Daylight if possible, and no flash reflection
  • A photo taken from further back
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area

If you are in Grange-over-Sands and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Common questions in Grange-over-Sands

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

What if the damage is worse than the pictures show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including pastel and older colours.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one, so mention it when you send photos.

Will the repair show?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Do you cover Grange-over-Sands?

Yes. We work across the UK and travel to Grange-over-Sands and the rest of Cumbria. Send photos and we’ll quote, or call 0345 017 0787.

Do I have to be there?

We need someone to let us in. You don’t need to watch us work.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in acrylic we cannot reach from underneath
  • Leaking fittings, which need a plumber
  • Rust that has eaten right through a steel bath

If in doubt, send pictures and we will say what we think.

Materials we work on in Grange-over-Sands

  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.