Flintshire · England
Bath Repair in Burntwood Pentre
Fixed-price bath repair in Burntwood Pentre and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- A chipped rim or side
- Holes from dropped items
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Bath repair in Burntwood Pentre, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Our repair technicians work on cast iron enamel, pressed steel enamel and acrylic, and the jobs we see most are scuffs and scratches in the surface and cracks in an acrylic bath.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Burntwood Pentre (CH7)
- County
- Flintshire
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Advice
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Nearby places to Burntwood Pentre
Other services in Burntwood Pentre
Burntwood Pentre and nearby
Burntwood Pentre is about 1 mile north-east of Bwcle, in Flintshire. Anywhere in CH7, a technician comes to you. Burntwood Pentre is one of 139 places in Flintshire we cover. You can also see our page for Liverpool, about 17 miles away.
We cover every part of the CH7 postcode area and the streets around it. Whether you live on Burntwood Road, Mount Pleasant Road and Standard Road or a nearby road, a technician can come to you. Neighbouring places we cover include Drury (1 mile south-east), Lane End (1 mile south), Hawarden (1 mile north-east), Coppa View (1 mile south-west) and Little Mountain (1 mile south). Within a short drive, we also cover Connah's Quay (3 miles north), Flint (5 miles north-west), Saltney (6 miles east), Mold (4 miles west), Holywell (10 miles north-west) and Lache (6 miles east).
What’s near Burntwood Pentre
We visit homes around Drury C.P. School, The Burntwood pub and Elfed High School. Other local landmarks include Gladstone's Library (1.5 miles north-east), The Good Shepherd (under half a mile south) and Etna Park (less than half a mile west). The nearest railway station is Buckley station, about 0.9 miles south of the centre. Other landmarks nearby include Buckley Library (1 mile south-west) and Broughton Shopping Park (3.6 miles east). Green spaces nearby include Deeside Nature Reserve and Padeswood Pool.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Burntwood Pentre questions
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
How long does the repair take to cure?
Most baths can be used the following day. We’ll tell you the exact curing time when we finish.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Something went through my bath. Can it be fixed?
Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Do you cover the entire of Flintshire?
Across the UK. Prices do not change with location.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Flintshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Burntwood Pentre. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- No extra charge for your area
- Dust sheets down, tidy finish
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing and guide to resurfacing and replacement costs.
What affects the price in Burntwood Pentre
Prices start from £95. We give every job a fixed price from pictures. This is what makes a difference:
- The material and finish
- How easy the damage is to reach
- The size and number of damaged areas
- How many items we do on one visit
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A close-up of the damage, in focus
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Details of any past repairs
Send us a picture of the damage and one of the whole item, with your CH7 postcode, and we will come back with a fixed quote.
Keeping it looking good
How the surface is treated afterwards matters:
- A dripping tap stains enamel, so fix it early
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Keep metal cans and razors off the surface
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
