East Riding of Yorkshire · England
Bath chip & crack repair in Burton Pidsea, East Riding of Yorkshire
Bath repair in and around Burton Pidsea: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Rusty patches near the plughole
Bath repair in Burton Pidsea, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. If you’re dealing with an old repair that has yellowed or come loose and deep scratches in acrylic, we can help, on acrylic, pressed steel enamel and roll-top & freestanding alike.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Burton Pidsea (HU12)
- County
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
What bath repair costs
Repairs from £95. You’ll know the full cost before you book. We look at:
- What kind of damage it is
- How much damage there is
- Any earlier repairs that need removing first
- The colour and finish to match
A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Any details about the material
- Any earlier repairs or coatings
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
The process
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a few hours in most cases. The room is left tidy and ready to use once it has cured.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
Burton Pidsea questions
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Do you work in Burton Pidsea?
Yes. We cover the entire UK and come to Burton Pidsea and the rest of East Riding of Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.
How long does the repair take to cure?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
What a repair can’t fix
To be straight with you, there are a few things a repair will not fix:
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Burton Pidsea
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
How to care for the repair
How the surface is treated afterwards matters:
- Rinse it down after each bath
- Don’t scrub with anything abrasive
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
There’s nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
When to call us in Burton Pidsea
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Contact us if you’ve noticed:
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
What your quote should include
- If travel is included in the price
- Aftercare advice
- How the room is protected while they work
- How long it needs to cure
Where we work around Burton Pidsea
Burton Pidsea is about 10 miles east of Kingston upon Hull, in East Riding of Yorkshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Burton Pidsea is one of 299 places in East Riding of Yorkshire we cover. You can also see our page for Leeds, about 59 miles away.
All of HU12 is covered. You will find streets such as Chestnut Garth, Bellsgarth Road and Main Road, and we cover them all. Other places close to Burton Pidsea include Danthorpe (1 mile north), Elstronwick (1 mile north-west), Burstwick (2 miles south-west), Humbleton (2 miles north-west) and Lelley (3 miles west). Further out, we also cover Beverley (14 miles north-west), Hessle (14 miles west), Cottingham (13 miles west), Hornsea (11 miles north), Hedon (4 miles south-west) and Anlaby (13 miles west).
What’s near Burton Pidsea
Locally, our jobs take us to homes close to Black Bull pub, Church of Saint Peter and Saint Paul and Burton Pidsea Primary School and the streets around them. Nearby you’ll also find Burstwick Castle (2.2 miles south-west).
Towns and villages near Burton Pidsea
Also in Burton Pidsea
About our accreditations · Every repair comes with a one-year guarantee.
