East Riding of Yorkshire · England

Bath chip & crack repair in Burstwick, East Riding of Yorkshire

Fixed-price bath repair in Burstwick and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Burstwick

Landlords, agents and businesses in Burstwick

For developers and builders, we fix damage before handover. We can visit several plots in one trip.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

How we handle bath repair in Burstwick

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Whether it’s damage done while the bathroom was being fitted and scratches you can feel with a fingernail, we can help.

Every job is backed for twelve months in Burstwick and everywhere else. If something goes wrong with the work, we come back.

Where
Burstwick (HU12)
Area hub
East Riding of Yorkshire
Cover
One year on every repair
Quotes
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Burstwick and nearby

Burstwick is about 9 miles east of Kingston upon Hull, in East Riding of Yorkshire. Whether you’re in the middle of Burstwick or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover 299 places across East Riding of Yorkshire, from the larger towns to small villages. We work right across the region, from Burstwick to Leeds (about 58 miles away).

Our repair technicians cover all of the HU12 postcode area. That includes homes on Main Street, Station Road and Nettleton Garth and the roads around them. We also cover the places around Burstwick: Camerton (1 mile south-west), Ryehill (1 mile south), Thorngumbald (2 miles south-west), Keyingham (2 miles south-east) and Hedon (2 miles west). Larger places within reach include Beverley (14 miles north-west), Hessle (12 miles west), Cottingham (12 miles west), Hornsea (12 miles north), Anlaby (12 miles west) and Willerby (12 miles west).

Near you in Burstwick

Around Burstwick, we work in homes near All Saints' Church and Burstwick Community Primary School and the streets around them. A little further out are Hedon Museum (2.4 miles west) and Burstwick Castle (0.8 miles north-west).

Map of Burstwick © OpenStreetMap contributors

What we can’t put right

In fairness, some problems need a different fix:

  • Rust that has eaten right through a steel bath
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Flexing caused by a failed cradle or loose feet

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

Repairing versus replacing in Burstwick

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.

Why us?

  • A fixed quote before booking
  • Rooms protected and left tidy
  • CHAS and Constructionline accredited
  • No need to remove anything

Take a look at our full price list and bath cost comparison.

How we price bath repair

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • Any earlier repairs that need removing first
  • What kind of damage it is
  • The material and finish
  • The colour and finish to match

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Send photos for a quote

Photographing the damage takes a minute. Please include:

  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings
  • A wider photo showing the whole bath

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Give the bath a quick rinse after use
  • Cover the bath during DIY or decorating
  • Store metal items away from the bath
  • Avoid scourers, wire wool and gritty cream cleaners

Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

When to call us in Burstwick

Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

Clients normally contact us about:

  • An old repair that has yellowed or come loose
  • Deep scratches in acrylic
  • Chips along the edge of the bath
  • Snagging damage from a refit

What to look for in a quote

  • How soon you can use it again
  • A fixed price, and whether VAT is included
  • What the guarantee covers, and for how long
  • How changes to the job are handled

10 questions to ask before you book

Common questions in Burstwick

What happens after I send pictures?

You get a fixed price and available dates. If we need another angle, we will ask.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Something went through my bath. Can it be fixed?

Normally. Photos of the hole and the underside help us check.

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Is there any odour?

There can be some smell while we work. It fades as everything cures.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

How much does bath repair cost in Burstwick?

Repairs from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

The process

Arrival times are agreed in advance. On site, it takes two to three hours for most chips in most cases. We leave the room clean and you will know when it can be used.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat
  • Mention any parking restrictions or tricky access

Get a quote

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Advice

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.