Warrington · England
Bath chip & crack repair in Burtonwood, Warrington
Damaged bath in Burtonwood? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips under the taps
- An old repair that has yellowed or come loose
Bath repair in Burtonwood without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people contact us are chips along the edge of the bath and damage done while the bathroom was being fitted.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Burtonwood (WA5)
- Region
- Warrington
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Burtonwood
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- Previous DIY repairs that have to come out
- The material and finish
- The type of damage
- The colour and finish to match
Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
You can usually get a fixed price without us visiting. To make it quick:
- Where you are, by postcode
- A wider photo showing the whole bath
- Natural light rather than flash
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Signs you need bath repair in Burtonwood
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Most people get in touch when they notice one of these:
- A chipped rim or side
- A cracked acrylic bath
- Scuffs and scratches in the surface
- Damage beneath the taps
Comparing quotes
- How the colour is matched
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
- How to look after the finish
When we’d advise against a repair
We won’t take on work that won’t last, so these are the limits:
- Wear across the entire surface, which needs re-enamelling
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Repairing versus replacing in Burtonwood
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Burtonwood. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Fixed prices from your photos
- Honest advice, even when it means no job
- Repair technicians who travel to you, UK-wide
- One price list for the whole UK
See our full price list or resurfacing vs replacement cost guide.
Nearby places to Burtonwood
More services for Burtonwood
About Burtonwood
Burtonwood is about 2 miles south-west of Newton-le-Willows, in Warrington. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 72 towns and villages in Warrington. Our jobs stretch from Burtonwood to Liverpool (about 11 miles away).
Every address in WA5 is within our area. Streets in the area include Chapel Lane, Weymouth Road and Arundell Close. Neighbouring places we cover include Collins Green (1 mile north-west), Vulcan Village (1 mile north-east), Earlestown (1 mile north), Newton-le-Willows (2 miles north-east) and Callands (2 miles south-east). We also work in nearby towns such as Warrington (4 miles south-east), Golborne (4 miles north-east), Lymm (8 miles south-east), Fearnhead (4 miles east), Wilderspool (5 miles south-east) and Lowton (4 miles north-east).
Near you in Burtonwood
We visit homes around Chapel Lane Park, St Paul of the Cross Catholic Primary School and Church of St Michael and All Angels, among other places. For rail, the closest station is Earlestown station, roughly 1.6 miles north-east. Other landmarks nearby include Cockhedge Shopping Centre (3.8 miles south-east) and World of Glass (3.6 miles west). Not far away are Highfield Moss.
How the visit works
Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes two to three hours for most chips in most cases. We leave the room clean and you’ll know when it can be used.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
How to get a price
To get a price, send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Advice
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Common questions in Burtonwood
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
