Derbyshire · England

Bath Repair for Carr Vale homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Carr Vale, with a one-year guarantee on every repair.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Carr Vale

Bath repair in Carr Vale without replacing anything

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair cast iron enamel, acrylic and pressed steel enamel, and common reasons people get in touch are chips caused by builders and damage beneath the taps.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Before and after: a chipped, rust-stained bath around the plughole
Location
Carr Vale (S44)
County
Derbyshire
Warranty
One year on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Our work in Carr Vale

Carr Vale is about 1 mile south-west of Bolsover, in Derbyshire. Clients in Carr Vale get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Carr Vale is one of 532 towns and villages in Derbyshire we cover. You can also see our page for Manchester, about 42 miles away.

All of S44 is covered, from the main roads to the quietest streets. Jobs here include addresses on Water Lane, Main Street and Villas Road. If you are just outside Carr Vale, we cover New Bolsover model village (1 mile north), Rylah (1 mile south), Bolsover Woodhouse (1 mile north), Markham Vale (2 miles north-west) and Long Duckmanton (2 miles north-west). Larger places within reach include Chesterfield (6 miles west), Belper (15 miles south-west), Heanor (15 miles south), Dronfield (9 miles north-west), Ripley (13 miles south) and Staveley (3 miles north-west).

Local landmarks in Carr Vale

Around Carr Vale, we work in homes near Sportsman pub, The Bolsover School and Church of St Mary and St Lawrence and the streets around them. Other local landmarks include The Bolsover School (1.1 miles east) and New Bolsover Primary and Nursery School (less than half a mile north). The nearest railway station is Langwith - Whaley Thorns station, about 3.9 miles east of the centre. Further afield, we also cover the area around Stainsby Mill (2.9 miles south) and Bolsover Castle (0.5 miles north-east).

Map of Carr Vale © OpenStreetMap contributors

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Give the bath a quick rinse after use
  • Have new chips seen to early
  • Avoid scourers, wire wool and gritty cream cleaners
  • Cover the bath during DIY or decorating

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.

How the visit works

Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can usually use the bath the next day.

How to prepare

  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on
  • Clear toiletries, mats and anything else from around the area

Get a quote

Email us a photo of the damage and a wider shot of the whole item, with your S44 postcode, and we will reply with a fixed quote.

Send photos for a quote

Advice

When a repair isn’t the answer

To be straight with you, there are a few things a repair will not fix:

  • Water coming from the waste or taps rather than the bath
  • A bath worn all over, where resurfacing makes more sense
  • Rust that has eaten right through a steel bath

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding

Your questions about bath repair in Carr Vale

Do you work in Carr Vale?

Yes. We cover the whole UK and come to Carr Vale and the rest of Derbyshire. Send photos and we will quote, or call 0345 017 0787.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Will the repair show?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Is a bath repair durable?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

For landlords and businesses

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

Common problems we fix in Carr Vale

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

Keep an eye out for any of the following:

  • A chip where the taps sit
  • A kit repair that didn’t last
  • Damage done while the bathroom was being fitted
  • Chips on the rim or sides

What to look for in a quote

  • What protection goes down before work starts
  • Whether the price covers travel
  • How long it needs to cure
  • Whether a trained technician does the job

How to compare quotes

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

What affects the price in Carr Vale

Repairs from £95. We do not charge extra for travel to Carr Vale. The price depends on:

  • Unusual colours or finishes
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off
  • What kind of damage it is

Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Getting a price from pictures

Most quotes are done from pictures alone. To help us price it:

  • Any details about the material
  • A clear, close picture of the problem area
  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.