Wiltshire · England
Bath Repair for Castle Combe homes
Bath repair for Castle Combe, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Common problems we fix in Castle Combe
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
If you can see any of these, send us a picture:
- A cracked acrylic bath
- Rust spots around the plughole
- Holes from dropped items
- An old repair that has yellowed or come loose
What to look for in a quote
- How changes to the job are handled
- When it can be used again
- Aftercare advice
- How your room will be protected
Bath repair in Castle Combe without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Whether it’s hairline or through cracks in acrylic and an old repair that has yellowed or come loose, we can typically put it right, on roll-top & freestanding, acrylic and whirlpool & spa baths alike.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Castle Combe (SN14)
- Area hub
- Wiltshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Castle Combe
Castle Combe is about 5 miles north-west of Chippenham, in Wiltshire. From the centre of Castle Combe to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Castle Combe is one of 425 towns and villages in Wiltshire where we work. Our nearest city page is Birmingham, about 69 miles away.
We cover every part of the SN14 postcode area. From The Street, West Street and Park Lane or anywhere nearby, a technician can come to you. We also travel to Upper Castle Combe (1 mile north-east), Nettleton (1 mile west), Ford (1 mile south), West Kington (2 miles west) and Slaughterford (2 miles south). Within a short drive, we also cover Trowbridge (12 miles south), Chippenham (5 miles south-east), Calne (10 miles east), Devizes (14 miles south-east), Melksham (9 miles south-east) and Corsham (5 miles south).
Landmarks near Castle Combe
In Castle Combe, that means homes near Church of St Andrew. A little further out are Chippenham Community Hospital (5.2 miles south-east) and Castle Combe Museum (under half a mile north). Open spaces near Castle Combe include Vincients Wood.
Castle Combe questions
Do you come to Castle Combe?
Yes. We cover the whole UK and travel to Castle Combe and the rest of Wiltshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Are there extra charges for Castle Combe?
Travel is included in the price, with the same prices everywhere we work.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Castle Combe. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- One price list for the entire UK
- Nothing taken out or refitted
- Fixed prices from your pictures
- Straight answers about what a repair can do
Read our prices page and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
How we price bath repair
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The material
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- A wider photo showing the entire bath
- A clear, close picture of the problem area
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. Most jobs take two to three hours for most chips, and you’re welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Read more
Towns and villages near Castle Combe
What else we do in Castle Combe
Work for landlords and builders
If you manage property in Castle Combe, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
