Fife · Scotland
Bath chip & crack repair in Ceres, Fife
Damaged bath in Ceres? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Holes from dropped items
- Deep scratches in acrylic
Work for landlords and builders
Landlords, letting agents and housing providers in Ceres use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our bath repair in Ceres
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for a cracked acrylic bath and holes from dropped items, across acrylic, pressed steel enamel and cast iron enamel.
Big or small, it’s backed by a one-year guarantee.
- Area
- Ceres (KY15)
- Area hub
- Fife
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath repair in Ceres?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
The most common problems we’re called about are:
- Impact holes in acrylic
- Hairline or through cracks in acrylic
- Damage beneath the taps
- Scratches you can feel with a fingernail
Before you book anyone
- Whether the colour is mixed to match
- Whether the price covers travel
- When it can be used again
- How to look after the finish
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What a repair can’t fix
A repair isn’t right for every job, for example:
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Where we work around Ceres
Ceres is about 10 miles north-east of Glenrothes, in Fife. Wherever you are in the KY15 postcode area, we come to you. We cover 133 places in Fife. Our jobs stretch from Ceres to Edinburgh (26 miles away).
Our technicians cover all of the KY15 postcode area and the streets around it. Streets in the area include Main Street, High Street and Kirkbrae. We also cover the places around Ceres: Craigrothie (1 mile south-west), Pitscottie (1 mile north-east), Cupar (2 miles north-west), Cupar Muir (3 miles north-west) and Springfield (3 miles west). Within a short drive, we also cover Kirkcaldy (14 miles south-west), Glenrothes (10 miles south-west), Leven (7 miles south), St Andrews (7 miles north-east), Dysart (13 miles south-west) and Methil (8 miles south).
Local landmarks in Ceres
Around Ceres, we work in homes near Ceres Parish Church and the streets around them. The closest station to Ceres is Cupar station, about 2.1 miles north-west of the centre. Nearby you will also find Craighall Castle (0.8 miles south-east) and Fife Folk Museum (less than half a mile south-east). For a walk, there’s Largo Law.
Towns and villages near Ceres
Also in Ceres
The process
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
FAQs for Ceres
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
What happens once I’ve sent photos?
We come back with a fixed quote, typically with dates to choose from. There is no obligation to book.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Should you replace it?
Many people think a damaged bath means a new one. Typically it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why choose Surface Doctor in Ceres
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Colour mixed on the day to match
- No need to remove anything
Read our pricing or bath cost comparison.
Keeping it looking good
How the surface is treated afterwards matters:
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
- Don’t leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
