Fife · Scotland
Bath Repair for Pitscottie homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Pitscottie, with a one-year guarantee on every repair.
- Repairs from £95
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
Bath repair in Pitscottie, done in place
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. Our repair technicians work on whirlpool & spa baths, cast iron enamel and acrylic, and people most often call us about damage done while the bathroom was being fitted and impact holes in acrylic.
You get a one-year guarantee, the same in Pitscottie as everywhere else we work.
- Where
- Pitscottie (KY15)
- Region
- Fife
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- A dripping tap stains enamel, so fix it early
- Make sure an acrylic bath is firm underfoot
- Do not leave razors or cans standing in the bath
- Give the bath a quick rinse after use
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Nearby places to Pitscottie
More services for Pitscottie
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Repairing versus replacing in Pitscottie
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Colour mixed on the day to match
- One visit for most repairs
- Every repair guaranteed for a year
- No extra charge for your area
Take a look at our pricing and resurfacing vs replacement cost guide.
About Pitscottie
Pitscottie is about 12 miles south of Dundee, in Fife. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. We cover all 133 towns and villages in Fife. Our jobs stretch from Pitscottie to Edinburgh (27 miles away).
Here we cover the KY15 postcode area. We regularly work on streets such as Cupar Road, Ceres Road and Elie Road. We also cover the places around Pitscottie: Ceres (1 mile south-west), Dairsie (3 miles north), Craigrothie (3 miles south-west), Cupar (3 miles west) and Strathkinness (3 miles north-east). Larger places within reach include Kirkcaldy (15 miles south-west), Glenrothes (12 miles south-west), Leven (8 miles south), St Andrews (6 miles east), Dysart (14 miles south-west) and Methil (9 miles south).
Around Pitscottie
The closest station to Pitscottie is Cupar station, roughly 2.6 miles west. A little further out are Craighall Castle (1.6 miles south) and Fife Folk Museum (1.5 miles south-west).
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Work for landlords and builders
For anyone letting property in or around Pitscottie, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours. We tidy up before we leave and let you know when you can use it again.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Read more
How we price bath repair
Repairs from £95. We do not charge extra for travel to Pitscottie. The price comes down to:
- The material
- Access to the area
- Whether old repairs or coatings need taking off
- How hard the colour is to match
A repair is priced on what needs doing, not your postcode. You will see the full price before you book.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- A photo taken from further back
- Something in shot to show the size
- Whether it’s been repaired or coated before
- Natural light rather than flash
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
FAQs for Pitscottie
How much does bath repair cost in Pitscottie?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
When can I have a bath again?
Usually the day after. We’ll tell you the exact curing time when we finish.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
