Lancashire · England
Bath Repair for Chapel-le-Dale homes
We travel to Chapel-le-Dale for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Snagging damage from a refit
- Scratches you can feel with a fingernail
Covering Chapel-le-Dale
Chapel-le-Dale is about 17 miles south-east of Kendal, in Lancashire. Our repair technicians come to customers in Chapel-le-Dale and the surrounding area, so nothing has to leave your home. Chapel-le-Dale is one of 482 towns and villages in Lancashire we cover. You can also see our page for Leeds, about 43 miles away.
Our visits in LA6 work the same way as everywhere else we cover. Neighbouring places we cover include Selside (3 miles south-east), Ingleton (4 miles south-west), Cold Cotes (4 miles south), Deepdale (4 miles north) and Newby (5 miles south). Further out, we also cover Caton (15 miles south-west), Kirkby Lonsdale (8 miles west), High Bentham (7 miles south-west), Holme (13 miles west), Warton (15 miles west) and Burton-in-Kendal (13 miles west).
What’s near Chapel-le-Dale
Around Chapel-le-Dale, we work in homes near Church of St Leonard and the streets around them. The closest station to Chapel-le-Dale is Ribblehead station, roughly 1.7 miles north-east of the centre. Not far away are Ling Gill and Blea Moor.
About our bath repair in Chapel-le-Dale
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include rust by the waste and overflow and chips under the taps, across roll-top & freestanding, acrylic and whirlpool & spa baths.
All our work is covered by a one-year guarantee.
- Where
- Chapel-le-Dale (LA6)
- County
- Lancashire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
The process
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a morning or an afternoon. We leave the room clean and ready to use once it has cured.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Open a window if you can
Get a quote
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Places near Chapel-le-Dale
More services for Chapel-le-Dale
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
How we price bath repair
Prices start from £95. We price every job individually. What matters most is:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Doing more than one item at once
- How much damage there is
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- One picture of the whole bath
- The material, if you know it
- One sharp close-up of the damage
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Chapel-le-Dale: your questions answered
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is there a guarantee?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Are there extra charges for Chapel-le-Dale?
Travel is included in the price, with the same prices everywhere we work.
Do you work in Chapel-le-Dale?
Yes. We work across the UK and travel to Chapel-le-Dale. Send pictures and we’ll quote, or call 0345 017 0787.
When a repair isn’t the answer
In fairness, there are a few things a repair will not fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Do you need bath repair in Chapel-le-Dale?
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
Common reasons people in Chapel-le-Dale contact us include:
- A kit repair that didn’t last
- Rust by the waste and overflow
- Cracks in an acrylic bath
- Holes from dropped items
What your quote should include
- What happens if the damage is worse than the pictures show
- What prep work is covered
- If travel is included in the price
- How the room is protected while they work
Landlord and trade work in Chapel-le-Dale
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Chapel-le-Dale as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
