Hertfordshire · England

Bath Repair in Chells

Bath repair for Chells, without a refit. Send us pictures for a fixed quote, then we come to you.

  • Repairs from £95
  • A chip where the taps sit
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Chells

Bath repair in Chells, done in place

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Our repair technicians work on cast iron enamel, whirlpool & spa baths and acrylic, and the jobs we see most are deep scratches in acrylic and chips along the edge of the bath.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Rusty chip next to a bath plughole, before and after repair
Location
Chells (SG2, SG1)
Region
Hertfordshire
Cover
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026

Why repair rather than replace?

A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • We come to you, anywhere in the UK
  • No extra charge for your area
  • Colour mixed on the day to match
  • We’ll tell you if it’s not worth repairing

Read our prices page or guide to resurfacing and replacement costs.

How the visit works

We work cleanly and quietly. We protect the area first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to look after it.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, typically the next day.

How to prepare

  • Ensure the area is dry
  • Let us know about parking or access
  • Move bottles, mats and clutter away from the area

Getting a price

If you are in Chells and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed price

Related advice

Looking after it afterwards

So the finish stays in good condition:

  • Put a towel in the bath if you are working above it
  • Clean with warm water and a mild detergent
  • Keep abrasive pads and gritty cleaners away from the bath
  • Rinse the bath after use, especially in hard water areas

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

Questions from Chells

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you redo someone else’s repair?

Yes, we frequently do. Removing the old work can add time, and that’s in the quote.

Can you repair a chip on a coloured bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Will the repair show?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

Can you do more than one item on the same visit?

Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.

Do you come to Chells?

Yes, we do. Repair technicians travel to Chells from across the region, and the price is the same as everywhere else.

What happens next?

We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.

What we’re called out for in Chells

Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Most people contact us after spotting one of these:

  • A failed DIY repair that’s discoloured or lifting
  • A chip where the taps sit
  • A chipped rim or side
  • Snagging damage from a refit

Questions to ask before booking

  • Who turns up on the day
  • What aftercare is recommended
  • How the colour is matched
  • If travel is included in the price

How to compare quotes

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.

Honest limits

Some jobs are not right for a repair, for example:

  • Leaking fittings, which need a plumber
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Wear across the entire surface, which needs re-enamelling

Not sure? Send photos and we’ll give you a straight answer.

Materials we work on in Chells

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel

Materials and what they mean for the repair

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

Covering Chells

Chells is about 1 mile east of Stevenage, in Hertfordshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Chells is one of 381 towns and villages in Hertfordshire we cover. Our jobs stretch from Chells to London (about 29 miles away).

Every address in SG2 and SG1 is covered, from the main roads to the quietest streets. From Scott Road, Eliot Road and Newton Road or anywhere nearby, we can come to you. Neighbouring places we cover include Stevenage (1 mile west), St Nicholas (1 mile north-west), Pin Green (1 mile west), Aston End (1 mile south-east) and Bedwell (1 mile south-west). Larger places within reach include St Albans (13 miles south-west), Bishop's Stortford (14 miles east), Welwyn Garden City (8 miles south), Harpenden (10 miles south-west), Hitchin (5 miles north-west) and Hoddesdon (13 miles south-east).

Near you in Chells

Our clients here include homes close to St Hugh & St John, The Nobel School and Lodge Farm Primary School and the streets around them. Chells’s nearest station is Stevenage station, roughly 1.8 miles south-west of the centre. Nearby you will also find Lister Hospital (2.1 miles north-west) and Benington Castle (2.4 miles south-east). Open spaces near Chells include Pryor's Wood.

Map of Chells © OpenStreetMap contributors

What bath repair costs

Prices start from £95. You will not pay by the hour. The price is based on:

  • How many items we do on one visit
  • Access to the area
  • How many areas need work
  • Any earlier repairs that need removing first

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Send photos for a quote

Good photos mean an accurate price. Here’s what we find most useful:

  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • Natural light rather than flash
  • Something in shot to show the size

Send us photos of the damage and a wider shot of the whole item, and tell us you’re in Chells, and we’ll reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.