Devon · England
Bath chip & crack repair in Chilton, Devon
Bath repair across Chilton and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- A failed DIY repair that is discoloured or lifting

What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Bath repair in Chilton, done in place
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. We regularly repair pressed steel enamel, cast iron enamel and whirlpool & spa baths, and the jobs we see most are deep scratches in acrylic and snagging damage from a refit.
Every repair is covered by a one-year guarantee, wherever you are in Devon.
- Area
- Chilton (EX17)
- County
- Devon
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026

Nearby places to Chilton
Other services in Chilton
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. Our prices are the same across the UK, so there’s no premium for Chilton. What changes the price is the job itself: the material, the amount of damage and how many items.
Why book with us
- One price list for the whole UK
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
- Everything repaired in place
See our full price list and bath cost comparison.
How to look after the repair
After the repair has cured, a few habits help it last:
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
- Put a towel in the bath if you’re working above it
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Questions from Chilton
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
When can I have a bath again?
Most baths can be used the next day. We confirm the time before we leave.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do you cover the whole of Devon?
Everywhere in the UK, Chilton included. Travel is included in the price.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Landlords, agents and businesses in Chilton
For anyone letting property in or around Chilton, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Where we work around Chilton
Chilton is about 3 miles north-east of Crediton, in Devon. From the centre of Chilton to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Chilton is one of 586 places in Devon we cover.
Here we cover the EX17 postcode area. If you’re just outside Chilton, we cover Cheriton Fitzpaine (1 mile north), East Village (2 miles north-west), Shobrooke (2 miles south), Sandford (2 miles south-west) and Poughill (3 miles north). Within a short drive, we also cover Exeter (8 miles south-east), Tiverton (8 miles north-east), St Thomas (8 miles south-east), Larkbeare (8 miles south-east), Polsloe (8 miles south-east) and Cullompton (10 miles east).
What’s near Chilton
We visit homes around Church of St Mary the Virgin. The closest station to Chilton is Crediton station, about 3.2 miles south-west of the centre. Well-known places in the area include Crediton Hospital (3.5 miles south-west) and Crediton Museum (3.2 miles south-west). For a walk, there’s Raddon Top.
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- Any earlier repairs that need removing first
- Access to the area
- The material and finish
- How many areas need work
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Quotes from your photos
We price nearly every job from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A clear, close picture of the problem area
- A wider photo showing the whole bath
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What we are called out for in Chilton
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
- Chips on the rim or sides
- A failed DIY repair that’s discoloured or lifting
Before booking anyone
- Whether there are any call-out or travel charges
- How long it needs to cure
- The length of the guarantee and what it covers
- What happens if the damage is worse than the photos show
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We clean up when we’re done and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.

