Devon · England

Bath chip & crack repair in East Village, Devon

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in East Village and across Devon. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Chips on the rim or sides
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in East Village

Bath repair in East Village without replacing anything

We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s chips under the taps and a failed DIY repair that’s discoloured or lifting, we can help, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Location
East Village (EX17)
County
Devon
Guarantee
One year on every repair
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We work for landlords, letting agents and housing providers in East Village as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

Repair or replace in East Village?

Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in East Village

  • Dust sheets down, tidy finish
  • Straight answers about what a repair can do
  • Colour-matched on site
  • We come to you, anywhere in the UK

Take a look at our prices page or bath cost comparison.

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Fix dripping taps early to stop staining and limescale
  • Rinse the bath after use, especially in hard water areas
  • Clean with warm water and a mild detergent

Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.

Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.

East Village and the surrounding area

East Village is about 9 miles south-west of Tiverton, in Devon. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. We cover 586 places in Devon, from the larger towns to small villages.

Our technicians cover all of EX17 and the streets around it. Other places close to East Village include Chilton (2 miles south-east), Sandford (2 miles south), Cheriton Fitzpaine (2 miles east), Poughill (2 miles north) and Shobrooke (3 miles south-east). Within a short drive, we also cover Exeter (10 miles south-east), Tiverton (9 miles north-east), St Thomas (9 miles south-east), Larkbeare (10 miles south-east), Polsloe (9 miles south-east) and Cullompton (11 miles east).

Around East Village

Typical jobs here are in homes near Church of St Mary the Virgin and the streets around them. East Village’s nearest station is Crediton station, roughly 3.6 miles south of the centre. Well-known places in the area include Crediton Museum (3.1 miles south) and Crediton Hospital (3.2 miles south). The countryside around East Village includes Raddon Top.

Map of East Village © OpenStreetMap contributors

What we can’t put right

We won’t take on work that won’t last, so here’s what a repair can’t put right:

  • Metal that has corroded all the way through
  • Cracks in parts of an acrylic bath we cannot get to from below
  • A bath worn all over, where resurfacing makes more sense

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes two to three hours for most chips. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Ensure the room can be ventilated
  • Let us know which floor the room is on
  • Move bottles, mats and clutter away from the area

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Get a fixed price

Related advice

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.

Do you need bath repair in East Village?

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

Clients generally contact us about:

  • Impact holes in acrylic
  • Cracks in an acrylic bath
  • Chips along the edge of the bath
  • A kit repair that didn’t last

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • Whether a trained technician does the job
  • How the colour is matched
  • What the guarantee covers, and for how long

10 questions to ask before booking

Your questions about bath repair in East Village

Can you repair a failed DIY repair?

Regularly. We strip it out, deal with any rust and repair it again.

Will there be a smell?

Expect a mild smell while we are working that clears as it cures.

What happens once I’ve sent pictures?

We come back with a fixed quote. You are under no obligation.

How long does the repair take to cure?

Normally within a day, though it depends on what we have done.

What do you need from me?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Will the price change on the day?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.