North Yorkshire · England
Bath Repair in Chop Gate
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Chop Gate. Send photos for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Chips caused by builders
How to look after the repair
So the finish stays in good condition:
- Get any new chip repaired before it rusts
- Get a dripping tap fixed promptly
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you’re working above it
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
Bath repair at your home in Chop Gate
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the next day. Our repair technicians work on whirlpool & spa baths, pressed steel enamel and cast iron enamel, and common reasons people get in touch are hairline or through cracks in acrylic and scuffs and scratches in the surface.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Chop Gate (TS9)
- Area hub
- North Yorkshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- The size and number of damaged areas
- Doing more than one item at once
- What kind of damage it is
- Unusual colours or finishes
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Getting a price from photos
Most quotes are done from photos alone. To make it quick:
- Any details about the material
- Any earlier repairs or coatings
- One sharp close-up of the damage
- One picture of the entire bath
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Every repair guaranteed for a year
- No extra charge for your area
- Straight answers about what a repair can do
- We leave the room as we found it
Take a look at our full price list and guide to resurfacing and replacement costs.
What we can’t put right
A few problems are outside what a surface repair can do:
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Where we work around Chop Gate
Chop Gate is about 10 miles south of Guisborough, in North Yorkshire. Anywhere in TS9, a technician comes to you. Our technicians cover all 626 towns and villages in North Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 43 miles away.
Postcode districts we cover here: TS9. We also cover the places around Chop Gate: Carlton in Cleveland (4 miles north-west), Kirkby (4 miles north), Great Broughton (4 miles north), Great Busby (4 miles north-west) and Faceby (4 miles north-west). Within a short drive, we also cover Northallerton (12 miles west), Thirsk (13 miles south-west), Stokesley (6 miles north), Sowerby (14 miles south-west), Kirkbymoorside (12 miles south-east) and Great Ayton (7 miles north).
What’s near Chop Gate
Typical jobs here are in homes near Church of St Hilda and The Buck Inn and the streets around them. A little further out are Bumper Castle (4.6 miles south). For a walk, there is Cringle Moor.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours, tidy-up included.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Ensure the room can be ventilated
How to get a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
For anyone letting property in or around Chop Gate, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Towns and villages near Chop Gate
What else we do in Chop Gate
Questions from Chop Gate
How long does the repair take to cure?
Normally the next day. We’ll tell you the exact curing time when we finish.
Is a cracked acrylic bath repairable?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Do you work in Chop Gate?
Yes. We work across the UK and travel to Chop Gate. Send pictures and we will quote, or call 0345 017 0787.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
About our accreditations · Every repair comes with a one-year guarantee.
