Derbyshire · England

Bath chip & crack repair in Church Wilne, Derbyshire

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Church Wilne, with a one-year guarantee on every repair.

  • Repairs from £95
  • A kit repair that didn’t last
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Church Wilne?

Looking after it afterwards

A little care keeps the finish looking good. Our advice:

  • Do not leave a fresh chip for long
  • Do not scrub with anything abrasive
  • Protect the bath with a towel when doing jobs nearby
  • Fix dripping taps early to stop staining and limescale

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

How we handle bath repair in Church Wilne

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Our technicians work on pressed steel enamel, cast iron enamel and roll-top & freestanding, and people most frequently call us about snagging damage from a refit and chips along the edge of the bath.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Bath enamel chip by the waste, filled and colour matched (before and after)
Area
Church Wilne (DE72)
Area hub
Derbyshire
Guarantee
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Church Wilne

  • Everything repaired in place
  • We leave the room as we found it
  • Colour-matched on site
  • Fixed prices from your pictures

Read our pricing and bath cost comparison.

Church Wilne questions

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help.

Can you repair a hole in a bath?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

When can I have a bath again?

Most baths can be used the next day. We confirm the time before we leave.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.

I’m a tenant. Can you help?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Do you cover Church Wilne?

Yes. We work across the UK and come to Church Wilne. Send us photos for a fixed quote, or call 0345 017 0787.

Will the repair show?

On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

What areas do you cover?

All of Derbyshire, and the rest of the UK. There is no extra charge for travel.

Materials and what they mean for the repair

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

How it works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, usually by the day after, the bath is ready to use.

Preparing for the visit

  • Let us know about parking or access
  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you are under no obligation.

Get a fixed price

Read more

Church Wilne and nearby

Church Wilne is about 2 miles west of Long Eaton, in Derbyshire. Whether you’re in the middle of Church Wilne or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 532 towns and villages in Derbyshire. You can also see our page for Birmingham, about 37 miles away.

Here we cover the DE72 postcode area. If you are just outside Church Wilne, we cover Great Wilne (1 mile south), Draycott (1 mile north), Shardlow (1 mile south-west), Cavendish Bridge (1 mile south) and Ambaston (1 mile west). Further out, we also cover Swadlincote (12 miles south-west), Ilkeston (6 miles north), Belper (12 miles north-west), Heanor (9 miles north), Ripley (12 miles north) and Langley Mill (9 miles north).

What’s near Church Wilne

In Church Wilne, that means homes near Coach & Horses pub, Church of St Chad and The Long Eaton School. Nearby too are Shardlow Hall (1.1 miles south-west) and Draycott Community Primary School (1 mile north). The closest station to Church Wilne is Long Eaton station, about 2 miles east of the centre. A little further out are Castle Donington Museum (2.9 miles south) and Elvaston Castle (2.6 miles west). Not far away are Attenborough Nature Reserve.

Map of Church Wilne © OpenStreetMap contributors

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

What we cannot put right

We’d rather lose a job than do one that won’t last, so here’s what a repair can’t put right:

  • A bath that moves underfoot, until its support is fixed
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Metal that has corroded all the way through

Send us pictures and we will tell you honestly before you book.

What we work on

  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

What affects the price in Church Wilne

Repairs from £95. A fixed quote means you know the cost before booking. We take into account:

  • Unusual colours or finishes
  • The material and finish
  • Whether it’s a chip, crack, burn or wear
  • Access to the area

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Getting a price from photos

It only takes a minute to photograph the damage, and it saves a visit. Please include:

  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • A coin or ruler next to the damage for scale

If you’re in Church Wilne and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Common problems we fix in Church Wilne

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

Send us a photo if you notice any of these:

  • Chips caused by builders
  • Damage beneath the taps
  • Chips along the edge of the bath
  • Deep scratches in acrylic

What to look for in a quote

  • What happens if they find more damage
  • What preparation is included
  • How to look after the finish
  • How your room will be protected

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.