Flintshire · England
Bath Repair for Cilcain homes
Bath repair in and around Cilcain: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Damage beneath the taps
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
How we handle bath repair in Cilcain
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Our repair technicians work on pressed steel enamel, cast iron enamel and roll-top & freestanding, and common reasons people contact us are holes from dropped items and a chip where the taps sit.
Whatever the size of the job, it’s backed by a one-year guarantee in Cilcain and across Flintshire.
- Location
- Cilcain (CH7)
- County
- Flintshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Cilcain
Other services in Cilcain
Landlord and trade work in Cilcain
Housing associations and facilities teams use us for planned and reactive repairs in Flintshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What we do, step by step
We work cleanly and quietly. Protection goes down first, then the job itself takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
Our work in Cilcain
Cilcain is about 6 miles south-west of Flint, in Flintshire. From the centre of Cilcain to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Cilcain is one of 139 towns and villages in Flintshire we cover. Our jobs stretch from Cilcain to Liverpool (about 20 miles away).
Our visits in CH7 work the same way as everywhere else we cover. Whether you live on Parc-y-Llan, Glas-Coed and Ffordd-y-Llan or a nearby road, a technician can come to you. Close by, we cover Pont-newydd (1 mile east), Pantymwyn (1 mile east), Y Waun (2 miles east), Gwernaffield with Pantymwyn (2 miles east) and Rhydymwyn (2 miles north-east). Within a short drive, we also cover Connah's Quay (7 miles east), Buckley (6 miles east), Bwcle (6 miles east), Flint (6 miles north-east), Saltney (13 miles east) and Mold (4 miles east).
What’s near Cilcain
We visit homes around Ysgol Y Foel, Capel Gad and The White Horse pub, among other places. Nearby you will also find Mold Library and Museum (3.8 miles east) and Mold Community Hospital (3.5 miles east). Open spaces near Cilcain include Pen Coed Du and Moel Dywyll.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- We come to you, anywhere in the UK
- Nothing taken out or refitted
Read our pricing and resurfacing vs replacement cost guide.
When to call us in Cilcain
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Most people contact us after spotting something like this:
- A failed DIY repair that is discoloured or lifting
- A chip where the taps sit
- Deep scratches in acrylic
- Rust spots around the plughole
What your quote should include
- What protection goes down before work starts
- What happens if they find more damage
- What aftercare is recommended
- How long the guarantee is and what it covers
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Store metal items away from the bath
- Protect the bath with a towel when doing jobs nearby
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
What a repair can’t fix
It helps to know what we can’t do:
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Cilcain: your questions answered
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
How long before I can use the bath?
Generally within a day, though it depends on what we’ve done.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
About our accreditations · Every repair comes with a one-year guarantee.
