Neath Port Talbot · Wales
Bath Repair in Cimla
Problem with your bath in Cimla? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips under the taps
- A kit repair that didn’t last
Bath repair in Cimla without replacing anything
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We work on roll-top & freestanding, acrylic and pressed steel enamel, and common reasons people get in touch are cracks in an acrylic bath and scuffs and scratches in the surface.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Location
- Cimla (SA11)
- County
- Neath Port Talbot
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- How much damage there is
- Whether we combine several jobs
- The type of damage
- The material
Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
When you take your pictures, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- Something in shot to show the size
- What it’s made of, if you know
Upload a picture of the damage and one of the entire item, and tell us you are in Cimla, and we will come back with a fixed quote.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
How to get a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
Send us photos and we’ll tell you honestly.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
About Cimla
Cimla is about 1 mile south-east of Neath, in Neath Port Talbot. We travel to customers in Cimla and nearby villages, so you do not need to take anything anywhere. We work in 100 places across Neath Port Talbot.
Jobs in SA11 work the same way as everywhere else we cover. Jobs here include addresses on Cimla Road, Alder Road and Bwlch Road. Nearby, we also work in Efail Fach (2 miles east), Tonna (2 miles north-east), Blaenhonddan (2 miles north), Cwmbychan (2 miles south) and Aberdulais (2 miles north). Further out, we also cover Port Talbot (4 miles south), Sandfields (4 miles south), Baglan Moors (3 miles south), Sandfields West (4 miles south), Sandfields East (4 miles south) and Pontardawe (6 miles north-west).
Around Cimla
Locally, our jobs take us to homes close to Cefn Saeson, The Tudor Inn and St Catherine's Church and the streets around them. The closest station to Cimla is Neath station, about 1 mile north-west. A little further out are Gnoll House (0.7 miles north) and Neath Museum (0.9 miles north-west). Not far away are Gnoll Estate Country Park lake 1 and Pen Tyla Morris.
- Other local spots include Pelenna (1.7 miles east)
Also near Cimla
Other services in Cimla
Cimla questions
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and you’ll get one combined price.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- Free fixed quotes from pictures
See our pricing or bath cost comparison.
Common problems we fix in Cimla
A cracked acrylic bath typically wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the base flex.
Common reasons people in Cimla contact us include:
- Rust spots around the plughole
- A kit repair that didn’t last
- Chips along the edge of the bath
- A chip where the taps sit
What to look for in a quote
- What the guarantee covers, and for how long
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- How soon you can use it again
Work for landlords and builders
Landlords, letting agents and housing providers in Cimla use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly work with letting and managing agents. Send the address, photos and access details.
About our accreditations · Every repair comes with a one-year guarantee.
