Neath Port Talbot · Wales
Bath Repair in Clyne
Bath repair in Clyne without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- A chip where the taps sit
- Holes from dropped items
Bath repair in Clyne without replacing anything
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. We work on roll-top & freestanding, acrylic and pressed steel enamel, and common reasons people get in touch are a failed DIY repair that’s discoloured or lifting and rust by the waste and overflow.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Clyne (SA11)
- County
- Neath Port Talbot
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take a few hours.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Mention if the room is upstairs or in a flat
- Open a window if you can
- Let us know if it has been repaired before
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
- Protect the bath with a towel when doing jobs nearby
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Neath Port Talbot and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Places near Clyne
Also in Clyne
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Our work in Clyne
Clyne is about 4 miles north-east of Neath, in Neath Port Talbot. Our repair technicians come to homes and businesses in Clyne and nearby villages, so there’s no workshop to go to. We cover all 100 towns and villages in Neath Port Talbot, from the larger towns to small villages.
Our repair technicians cover all of the SA11 postcode area. Local streets include Maes Pwll, Lletty Dafydd and Ynys-yr-Afon, and we cover them all. Close by, we cover Aberdulais (2 miles south-west), Cil-ffriw (2 miles west), Tonna (2 miles south-west), Michaelston (3 miles south) and Tonmawr (3 miles south). Further out, we also cover Neath (4 miles south-west), Port Talbot (7 miles south), Sandfields (8 miles south-west), Mount Pleasant (4 miles south-west), Baglan Moors (7 miles south-west) and Sandfields West (8 miles south-west).
Around Clyne
Locally, our jobs take us to homes close to Rock & Fountain Inn. For rail, the closest station is Neath station, about 4 miles south-west. Further afield, we also cover the area around Tonna Hospital (1.8 miles south-west) and Neath Museum (3.8 miles south-west). Open spaces near Clyne include Gnoll Estate Country Park lake 1 and Mynydd Blaenafon.
- Local facilities include Neath Lower (0.7 miles north-west)
What bath repair costs
Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- The material
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Natural light rather than flash
The quickest way to a price is to send two or three pictures using our quote form or call us. We will say right away if a repair is the right fix.
Repair or replace in Clyne?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
Read our full price list and guide to resurfacing and replacement costs.
Clyne: your questions answered
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you cover Clyne?
We do. Repair technicians travel to Clyne from across the region, with no extra charge for travel.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Is a holed acrylic bath repairable?
Generally. Send us a picture of the hole and one from under the bath if you can.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
- Leaking fittings, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Clyne
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
