Kent · England

Bath chip & crack repair in Coldred, Kent

Fixed-price bath repair in Coldred and the surrounding area, generally in one visit and guaranteed for a year.

  • Repairs from £95
  • Deep scratches in acrylic
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Coldred

What happens on the day

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Have a window or extractor fan available
  • Clear toiletries, mats and anything else from around the area

Getting a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.

Get a fixed quote

Advice

About our bath repair in Coldred

A typical bath repair is a few hours’ work, and the bath is back in use the next day. You will not need a plumber or tiler, because the bath doesn’t move. Typical jobs include a cracked acrylic bath and an old repair that has yellowed or come loose, on whirlpool & spa baths, acrylic and cast iron enamel.

Your repair is guaranteed for a year, as with every job we do.

Where
Coldred (CT15)
Area hub
Kent
Warranty
A year, on every repair
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Questions from Coldred

Is my repair covered?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Are there extra charges for Coldred?

There is no separate call-out charge. The fixed quote covers the visit and the work.

Can you redo someone else’s repair?

Most of the time. Tell us what was done before and we’ll plan for it.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will I be able to see the repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

Is a bath repair permanent?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

How to care for the repair

Looking after the surface is easy:

  • Clean with warm water and a mild detergent
  • Rinse the bath after use, especially in hard water areas
  • Do not leave razors or cans standing in the bath
  • If an acrylic bath flexes, have its feet adjusted

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Covering Coldred

Coldred is about 4 miles north-west of Dover, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 922 towns and villages in Kent, from the larger towns to small villages. Our nearest city page is London, about 62 miles away.

We cover every part of the CT15 postcode area. If you’re just outside Coldred, we cover Sibertswold (1 mile north-west), Lydden (1 mile south), Waldershare (1 mile north-east), Halfway Street (1 mile west) and Eythorne (2 miles north-east). We also work in nearby towns such as Canterbury (10 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (7 miles south-west), Ramsgate (13 miles north-east) and Broadstairs (15 miles north-east).

Around Coldred

Our customers here include homes close to Lydden Primary School, The Bell Inn and Church of St Pancras and the streets around them. The nearest railway station is Shepherds Well station, roughly 1.1 miles north-west. Well-known places in the area include Dover Castle (4.8 miles south-east) and Dover Transport Museum (2.6 miles south-east). Open spaces near Coldred include Dover Western Heights.

Map of Coldred © OpenStreetMap contributors

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • A steel bath rusted through
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Leaks from the waste or overflow fittings (a plumber’s job)

If in doubt, send pictures and we’ll say what we think before you book.

What we work on

  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding

Common problems we fix in Coldred

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.

People usually call us when they notice one of these:

  • Snagging damage from a refit
  • A chipped rim or side
  • A failed DIY repair that is discoloured or lifting
  • Rusty patches near the plughole

What to look for in a quote

  • How to care for the finish
  • What the guarantee covers, and for how long
  • How your room will be protected
  • Is the price fixed, and does it include VAT?

10 questions to ask before you book

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.

Repairing versus replacing in Coldred

Many people think a damaged bath means a new one. Typically it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

What you get with us

  • We come to you, anywhere in the UK
  • One visit for most repairs
  • Colour-matched on site
  • One price list for the whole UK

See our full price list or bath cost comparison.

For landlords and businesses

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.