Derbyshire · England
Bath chip & crack repair in Commonside, Derbyshire
Our technicians come to Commonside for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- Deep scratches in acrylic
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Bath repair at your home in Commonside
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. If you are dealing with holes from dropped items and scratches you can feel with a fingernail, we can typically put it right, on pressed steel enamel, acrylic and cast iron enamel alike.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Commonside (DE6)
- Region
- Derbyshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Do you need bath repair in Commonside?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
It’s worth getting a quote if you see:
- Chips caused by builders
- Hairline or through cracks in acrylic
- Scratches you can feel with a fingernail
- A chipped rim or side
What your quote should include
- Whether they match the colour on site
- How your room will be protected
- The length of the guarantee and what it covers
- Who will actually do the work
How it works
We work cleanly and quietly. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Have a window or extractor fan available
Ask for a price
Send us a photo of the damage and one of the whole item, and tell us you are in Commonside, and we’ll come back with a fixed quote.
Read more
Prices and what affects them
Repairs from £95. We don’t charge extra for travel to Commonside. The price depends on:
- What kind of damage it is
- How hard the colour is to match
- How easy the damage is to reach
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- A close-up of the damage, in focus
- Natural light rather than flash
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Questions from Commonside
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Is there any odour?
Expect a mild smell while we’re working.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can you quote from pictures?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
Nearby places to Commonside
More services for Commonside
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Aftercare tips
Aftercare is simple:
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
- Don’t leave a fresh chip for long
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.
Commonside and the surrounding area
Commonside is about 8 miles south-west of Belper, in Derbyshire. Customers in Commonside get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Commonside is one of 532 places in Derbyshire we cover. Our jobs stretch from Commonside to Birmingham (about 36 miles away).
Our technicians cover all of DE6 and the streets around it. From Mill Lane and Common Side or anywhere nearby, we can come to you. If you’re just outside Commonside, we cover Ednaston (1 mile north-west), Brailsford (1 mile east), Brailsford Green (1 mile south-east), Mercaston (2 miles east) and Shirley (2 miles west). Within a short drive, we also cover Swadlincote (14 miles south), Ilkeston (14 miles east), Belper (8 miles north-east), Heanor (12 miles east), Ripley (11 miles north-east) and Langley Mill (13 miles east).
What’s near Commonside
Around Commonside, we work in homes near Church of All Saints and Brailsford CofE Primary School. Further afield, we also cover the area around St Oswalds Hospital (5 miles north-west).
Why repair rather than replace?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why choose Surface Doctor in Commonside
- Rooms protected and left tidy
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
