Wiltshire · England
Bath chip & crack repair in Dinton, Wiltshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Dinton, with a one-year guarantee on every repair.
- Repairs from £95
- Holes from dropped items
- A kit repair that didn’t last
About our bath repair in Dinton
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s a kit repair that didn’t last and rust by the waste and overflow, we can usually put it right, on cast iron enamel, pressed steel enamel and roll-top & freestanding alike.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Area
- Dinton (SP3)
- County
- Wiltshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Work for landlords and builders
If you manage property in Dinton, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
When a repair is not the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly.
Materials we work on in Dinton
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Getting ready for the visit
- Open a window if you can
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
How to get a price
For a price in Dinton, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Questions from Dinton
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first, so let us know about it.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
What areas do you cover?
We cover the whole UK, including Dinton and the rest of Wiltshire. Send your postcode with your photos and we will confirm dates.
Also near Dinton
More services for Dinton
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Cover the bath during DIY or decorating
- Don’t leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Clean with warm water and a mild detergent
A repaired bath needs no special treatment. Skip bleach and gritty creams and give it a rinse after each bath.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Repairing versus replacing in Dinton
Swapping a damaged bath for a new one usually means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why us?
- Same prices wherever you are
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
Take a look at our full price list and resurfacing vs replacement cost guide.
Dinton and the surrounding area
Dinton is about 8 miles west of Salisbury, in Wiltshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We cover all 425 towns and villages across Wiltshire.
We work across the SP3 postcode area. You’ll find streets such as Snow Hill, Hindon Road and Tyndales Meadow, and we cover them all. We also cover the places around Dinton: Baverstock (1 mile east), Compton Chamberlayne (2 miles south-east), Barford St Martin (3 miles east), Broad Chalke (4 miles south) and Croucheston (5 miles south-east). We also work in nearby towns such as Salisbury (8 miles east), Westbury (15 miles north-west), Warminster (12 miles north-west), Amesbury (11 miles north-east), Bugmore (8 miles east) and Milford (9 miles east).
Near you in Dinton
Our clients here include homes close to Dinton CofE Primary School and Church of St Mary the Virgin and the streets around them. Dinton’s nearest station is Tisbury station, roughly 4.4 miles west. Other landmarks nearby include East Castle (3 miles north). Open spaces near Dinton include Fonthill Lake and Compton Down.
What we are called out for in Dinton
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Keep an eye out for any of the following:
- A failed DIY repair that is discoloured or lifting
- A hole punched through by something heavy
- Damage done while the bathroom was being fitted
- Damage beneath the taps
What to look for in a quote
- What the guarantee covers, and for how long
- What happens if they find more damage
- Whether cleaning and preparation are in the price
- How to look after the finish
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
