Gloucestershire · England
Bath Repair for Corse homes
Bath repair in Corse without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Chips along the edge of the bath
- Scuffs and scratches in the surface
Bath repair in Corse without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the day after. There is no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include a failed DIY repair that’s discoloured or lifting and a chipped rim or side, across roll-top & freestanding, cast iron enamel and acrylic.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Corse (GL19)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Corse
How long does the repair take to cure?
Normally by the following day, though it depends on what we’ve done.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What areas do you cover?
The whole UK, including all of Gloucestershire. Just include your postcode and we’ll offer you dates.
Can you repair a crack in an acrylic bath?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do the materials smell?
There may be a mild smell during the work.
Do you need bath repair in Corse?
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
The most common problems we’re called about are:
- Hairline or through cracks in acrylic
- Damage beneath the taps
- A failed DIY repair that’s discoloured or lifting
- A chipped rim or side
What your quote should include
- The length of the guarantee and what it covers
- Whether the price covers travel
- How the room is protected while they work
- How to look after the finish
What we can’t put right
Some jobs aren’t right for a repair, for example:
- Cracks in parts of an acrylic bath we cannot get to from below
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Different materials, different repairs
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Also in Corse
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Prices and what affects them
Repairs from £95. There is no area surcharge for Corse. What changes the price is:
- How many areas need work
- Unusual colours or finishes
- Doing more than one item at once
- The material
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
Phone photos are fine. Just make sure we can see:
- A photo taken from further back
- One sharp close-up of the damage
- What it’s made of, if you know
- Your postcode, so we can check dates
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Work for landlords and builders
Landlords, letting agents and housing providers in Corse use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About Corse
Corse is about 7 miles west of Tewkesbury, in Gloucestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 470 towns and villages in Gloucestershire, from the larger towns to small villages. We work right across the region, from Corse to Birmingham (39 miles away).
Our technicians cover all of the GL19 postcode area. Whether you live on Chartist Way, Cullingham Close and Prince Crescent or a nearby road, a technician can come to you. We also cover the places around Corse: Staunton (1 mile north-east), Hawcross (2 miles north-west), Lowbands (2 miles north-west), Wyndbrook (2 miles north) and Upleadon (3 miles south-west). We also work in nearby towns such as Cheltenham (10 miles south-east), Gloucester (8 miles south-east), Stroud (15 miles south), Tewkesbury (7 miles east), St Paul's (11 miles east) and Lansdown (11 miles south-east).
Local landmarks in Corse
Around Corse, we work in homes near Prince Of Wales Public House, Staunton and Corse Church of England Primary School and Church of St James. Green spaces nearby include Raggedstone Hill.
How the visit works
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Getting a price
Send us a picture of the damage and one of the entire item, and tell us you are in Corse, and we will come back with a fixed quote.
Advice
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Ensure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
