Gloucestershire · England
Bath Repair in Wyndbrook
Local bath repair for Wyndbrook: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Chips on the rim or sides
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How we handle bath repair in Wyndbrook
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We’re often asked to fix impact holes in acrylic and chips along the edge of the bath, on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Wyndbrook (GL19)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Wyndbrook questions
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can a cracked acrylic bath be fixed?
Typically, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
How do I get a price for bath repair in Wyndbrook?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you cover Wyndbrook?
Yes. We work across the UK and come to Wyndbrook and the rest of Gloucestershire. Send photos and we’ll quote, or call 0345 017 0787.
What affects the price in Wyndbrook
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- The colour and finish to match
- What the surface is made of
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
Photographing the damage takes a minute. Please include:
- A clear, close picture of the problem area
- Natural light rather than flash
- What it’s made of, if you know
- Your postcode, so we can check dates
To get a price, send a couple of pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
Getting ready for the visit
- Ensure the room can be ventilated
- Let us know which floor the room is on
- Let us know if it has been repaired before
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
Common problems we fix in Wyndbrook
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for these signs:
- A failed DIY repair that’s discoloured or lifting
- Cracks in an acrylic bath
- Chips on the rim or sides
- Scuffs and scratches in the surface
Comparing quotes
- Whether the colour is mixed to match
- How changes to the job are handled
- What prep work is covered
- How the room is protected while they work
Towns and villages near Wyndbrook
Also in Wyndbrook
About Wyndbrook
Wyndbrook is about 8 miles west of Tewkesbury, in Gloucestershire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Wyndbrook is one of 470 places in Gloucestershire we cover. We work right across the region, from Wyndbrook to Birmingham (38 miles away).
We cover every part of GL19. If you’re just outside Wyndbrook, we cover Pendock (1 mile north-east), Lowbands (1 mile south-west), Redmarley D'Abitot (2 miles south-west), Hawcross (2 miles south-west) and Staunton (2 miles south). Larger places within reach include Cheltenham (12 miles south-east), Gloucester (11 miles south), Tewkesbury (8 miles east), St Paul's (12 miles south-east), Lansdown (12 miles south-east) and Bishop's Cleeve (11 miles east).
Local landmarks in Wyndbrook
Around Wyndbrook, we work in homes near Church of the Redeemer and Pendock CofE Primary School, among other places. Further afield, we also cover the area around Bronsil Castle (3.3 miles north-west). The countryside around Wyndbrook includes Raggedstone Hill and Hollybed Farm Meadows.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Keep metal cans and razors off the surface
- Make sure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Put a towel in the bath if you are working above it
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What we can’t put right
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Wyndbrook, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
